ford 8600

  1. S

    ford 8600

    Can anyone please give me some what to look for on my Ford 8600 issue. The engine is stuck, I pulled the head, found as I thought, a open exhaust valve. Digging a little deeper I found antifreeze in the oil pan. Is this a common problem with the antifreeze? I have read a few articles and the...
  2. B

    Ford 8600

    Installed rebuilt injector pump and injectors. System is timed correctly, no fuel to injectors at least on the fwd two injector lines at the injectors while cranking.
  3. H

    FORD 8600 Alternator not charging

    I bought a new alternator & voltage regulator but my 8600 is still not charging the battery. Any ideas out there such as wiring or schematics since the repair manual is skimpy?
  4. H

    FORD 8600 Alternator not charging

    I bought a new alternator & voltage regulator but my 8600 is still not charging the battery. Any ideas out there such as wiring or schematics since the repair manual is skimpy?
  5. D

    Ford 8600 For Hay Work

    I have approximately 110 ac of fescue and bermudagrass pasture near Grantville GA where we get 3 cutting per year most years. Yield is 4-5 tons/ac in the 1st cutting most years & approx 3 tons/ac for the other two. I'm in an area with a lot of horse owners about 45 mins south of the Atlanta...
  6. H

    Problem cranking Ford 8600

    I've got a head scratcher. I have put in new fuel & air filters, bled lines, cleaned fuel pump & starter & lines in my 8600 but still won't crank. it will run briefly on either but quickly shuts off. very much like when I tried to crank it before I knew to put it in parking brake (between...
  7. C

    Ford 8600

    I need help timing my ford 8600 it is back firing into the oil pan, help thanks
  8. C

    Ford 8600 timing

    Does anyone know how to time a ford 8600? I have one and it's out of time and back firing in the oil pan. Thanks for your help!!
  9. H

    FORD 8600 LEAK AT GEARBOX

    my 8600 ford tractor is leaking pwr steering fluid under the shifter gearbox. service manual doesnt cover this. could it be a hose or seal leak?
  10. Soundguy

    need info on ford 8600

    I may ride out to look at a ford 8600 with a buddy of mine. Any info I can pass along. I'm not at all familiar with an 8600. ( though have done a bit of research on the 8000.. etc. ) I hear this unit has an 8spd.. etc, and is a 6cyl. Any info available is appreciated, including pro/con...
Top