ford 2110

Hello. I have a small farm with a lot going on. My mid 80s Ford 2110 with front loader and various implements old and new take care of nearly everything. Shibaura engine. Custom built front bucket. 🪣 It needs new rims and rear tires….some day! Also looking for a replacement flail mower.

The glow plug heater helps a little but it still only starts on 2 cylinders, and only when it feels like it. (black smoke when it tries to start) I was told today it may be a couple dead glow plugs. It started pretty well August/September, and always runs well and smooth once started. So...

So last January my hydraulics completely quit working. I don't have a shop so I left it 'til Spring' but I got T-boned in the car late February. Traumatic Brain Injuries (TBI) suck, and kept me sidelined until July/August when I could finally get back to the tractor issue. I found a young (22)...

My Ford 2110 front wheel bearings (2 wh dr) imploded today, having a hard time finding these on line, I need the everything, bearings, seals, any help will be appropriated

The glow plug indicator has burnt in two allowing power to flow to only one side of the indicator which does not charge the actual glow plugs. What's an easy fix? Can I just splice the wires together, doing away with the indicator? It will only be powered when the key is turned to the left right?

My 2110 will at times be difficult to steer other times normal except for excessive freeplay

I also posted in the NH side. Good evening, I need to replace all four of the tie rod ends on my little blue tractor. I have search google and since the 84 compact 2110 was not to popular all I find is parts for the much older 1960s 2110. Can someone help me find the correct sizes and where to...

Good evening, I need to replace all four of the tie rod ends on my little blue tractor. I致e search google and since the 84 compact 2110 wasn稚 to popular all I find is parts for the much older 1960s 2110. Can someone help me find the correct sizes and where to order them? Thanks for the help!!!!

Hi guys I need some HELP!. I was mowing on Sunday morning and went to shift gears from 3ed to 2nd and went straight down and got it in 4th by mistake and now its stuck in 4th. I cannot get it to pop out of 4th, its stuck and I've done everything I can think of to get out. I tried to get it out...

Hi guys I got a new to me 1985 ford 2110 tractor last weekend and this weekends project is flushing the coolant and changing out the thermostat and upper and lower hoses. Anyone have a correct part number? I have a service manual on order it will be here on Monday. Thanks for the info in advance!

Good morning everyone, Well on Friday afternoon I broke down and bought a used Ford 2110 tractor with a 5 brush Hog. For a 34-year-old tractor it痴 in pretty decent shape. I took it home Friday night and started cataloging some issues that I knew it had and found a few more. Some of the issues...

Parting a 1986 ford 2110. Located near Springfield, Vermont. What might be your needs.

Working on what I believe is a 2110 3 cylinder gas without power steering. The three point has always worked well and just stopped working at once. I checked the oil in the trans / rear end and it was over full with water and gear lube mix. I drained the mix out and removed the round covers off...

Today I changed the fuel filter on my 1986 Ford 2110. I filled the bowl to the top and started the tractor. It ran briefly then quit. It was not getting fuel. I get fuel at the top of the filter but when I tried to bleed the system I don't get any at the injectors. I was able to...

Looking for used good shape rims for 87 2110. thanks

My moms tractor is a ford 2110. Rims are rotted from calcium leaking. Need two rims so get this tractor up and running so I can use for her property. Tires are F 151 A. Thats the best i can do on the id on tires. Any help necessary.

We have a 1973 F2110 LCG. We keep loosing power steering fluid but there are no leaks showing any where. Looks like crankcase level is increasing. At first it would take all day to lose enough oil to cause the loss of steering , now it's about a half hour. The pump front seal is still...

Hi All, I lost a freeze plug during the winter and need to replace it. PROBLEM is: It's behind the Injector Pump. A guy I know is an x heavy equip mechanic and he said I'd better be careful because of the timing; that he thought there was a rod running from the Pump into the engine which...

Hi! New member here. Looking to buy a first time tractor. They are kinda scarce in my area. I would like really like to have a 4X4 due to the terrain and mud our property has. And of course, I have a tiny tractor budget. Anyway, I have come across a ford 2110, mid 80's, just over 4000 hours...

I just used this a few days ago to bush hog and grade my driveway and everything was working fine. This morning... Following a cold spell over the past few days... (temp's in the teens over night), I started it up this morning and attempted to raise the rear blade and it's unresponsive. I hear...

Hi Everyone, Yesterday when I needed to bleed the system, it blew a seal (o-ring) and spewed the fluid all over the place, including me. Luckily only on my shoes and bottom of my pants. I replaced the o-ring and it didn't leak. I did the "bleeding" thing and it blew another ring. Now, I have...

Lost my only key in the snow today, looked everywhere, hope to find it in the spring. Ford pn# 9849079. Is there an universal key out there.??

I was running my new to me 2110 this weekend and have put about 10 hours on it since I got it, , started getting a sulphar or rotten egg smell after running it about an hour or so this morning, never had this happen before and I have a 1910 that I have put 2,000 hrs on, is this the fuel or...

hey guys my brother tilled in our garden for the winter when I got home he called me and said the clutch was making noise I went and checked it the pto portion of the clutch works fine but the tractor wont move until the pedal is completely released and its making a bit of chatter when under a...

My 1986 Ford 2110 has just over 1100hrs and has an odd vibration that I can feel in the seat. It seems to pulse a bit and it is noticeable both with the PTO engaged and without it. The vibration reminds me of the dryer on spin cycle. Maybe the vibration is normal for this type of tractor...

When I have an implement on the 3 point, the tractor will lift it great (@ idle) before it warms up. Once the tractor gets warmed up, I have to increase the rpms to get the implement to raise. An hour or so later, I will not be able to raise the implement half the height as I could before the...

I just pulled a Ford 2110 out of the woods and was wondering if someone can fill me in on the gory details of this tractor. The ID# 00888, Model AV3135, Unit 4A27B, and the engine is T854B 10883. The tractor has been sitting for years and the last anyone heard it had a blown head gasket, what...

I just pulled a Ford 2110 out of the woods, it has been "resting" there for years. Can anyone tell me more about this tractor based on the numbers? ID# 00888, Model AV3135, Unit 4A27B, Engine T854B10883. I was told the head gasket is blown and there are some other parts missing, where is the...

I just pulled a Ford 2110 out of the woods, it has been "resting" there for years. Can anyone tell me more about this tractor based on the numbers? ID# 00888, Model AV3135, Unit 4A27B, Engine T854B10883. I was told the head gasket is blown and there are some other parts missing, where is the...

My ford 2110 has calcium loaded tires in the rear. The rear left rim if rusting out and I called the dealer the other day and he gave me a price of 1100.00 for the outer rim, it is a 2 piece rim with 8 loops. Are there any aftermarket companies out there that would be cheaper. Thanks Mark

My ford 2110 has calcium loaded tires in the rear. The rear left rim if rusting out and I called the dealer the other day and he gave me a price of 1100.00 for the outer rim, it is a 2 piece rim with 8 loops. Anyone have any suggestions or are there aftermarket companies that sell them. Thanks Mark

I've got a Ford 2110 tractor and having some trouble. When the tractor is cold all gears shift fine and tractor runs as it should. When it gets warmed up, the tractor speed gets slower and have to gear the tractor down to keep it moving. It finally gets to a point that it will only move in...

Am considering a clean looking 2110 4wd ford w/ loader that needs ring and pinion for $7,000. Not a bad job in a truck, how about this tracror? Any comments welcome. Mcdust

Hello! Can anyone advise me on how to remove a fuel injector pump from a Ford 2110 tractor? Thanks.

I have an 88 Ford 2110 with only 1100 hours on it. It's always taken what I think is too long for the glow plug to get hot, and when it's COLD out *never below freezing* it's really takes a long time to get hot. Do you think maybe it needs a new glow plug? BTW, in case they make'm any...

We are looking for used parts for a power steering gearbox on a Ford 2110 (1983-1987) Part nos SBA334010820 or SBA334292015 or SBA334292025. These parts are also used on some Ford 1910's. Thanks.

Does anyone know where I can get the complete decal set for our 1971 Ford 2110 3 CYL LCG Tractor. I found the sheetmetal needed to clean it up and wanted to paint it. Everywhere I look it says the decals are no longer available.

Well, I have learned much since my first post. First thing is my tractor is a 2110 not a 1710 :o I found the power steering pump and removed it but honestly I don't know what I am looking for. The gears look new both inside and out and when I add oil to the top intake hole and turn the gear...

I just came across a Ford 2110 Diesel 4x4, 2400 hours, FEL, pull behind mower. Turf tires, at least one flat. hasn't been run in three years, sitting outside. Guy is asking $2500, and doesn't have pics- it is 30 minutes from me. Thoughts? He didn't know if the motor would spin or not, said...

Hi All, I wanted to thank everyone for all the help I have received on this site. I have never owned a tractor before and I was able to get most of the information I need on this site and plan to use it in the future. I finally broke down and purchased a Ford 2110 last night with just over 1K...

whats the difference between the manual transmission and the syncromesh?

Can anyone tell me what size tires came on a late 1980's Ford 2110 4WD tractor. R1 Ag tires front and rear. Your help would be greatly appreciated.

I am having problems with a 2110 lcg clutch. It will only disengage sometimes. It is totally unpredictable in when it will stick and the only way to get it out of gear when it is sticking is to pull the gear shift out. It will sometimes work if I drop the bucket. Any ideas would be greatly...

Does any one have R4's on there Ford 2110?, if so what size are they? A friend of mine just bought a 2110 with turf tires and would like to get the R4's. Solo

Howdy all, I'm looking at a Ford 2110, unknown year (requesting SN to verify). 1700 hours overall, says that it's a rebuilt engine (asked about circumstances of that as well). Private owner selling it, still don't have that story either. Includes: Front loader (New Holland, can't make out...

Ford 2110 - what\'s the HP? I did a search for 2110 on these forums and got nothing?!? On Machinefinder.com there are two listed. One says 30hp and the says 40hp. Anyone know? Are these good tractors?