ford 1300 tractor

Hi folks, I'm working on a Ford 1300 4x4. The front axle isn't engaging. I've worked on 4x4 tractors before, and the front driveline is usually pretty straightforward, just gears and shafts with some type of engaging mechanism, usually at the trans. Can anyone tell me, is this machine similar...

Hi folks, I'm working on a Ford 1300 4x4. The front axle isn't engaging. I've worked on 4x4 tractors before, and the front driveline is usually pretty straightforward, just gears and shafts with some type of engaging mechanism, usually at the trans. Can anyone tell me, is this machine similar...

help with a ford 1300 4dw Good morning friends I just bought a broken ford 1300 4wd some parts are missing but I can't find a special part available, someone could help me Giving me measurements of the front axle support to make it on my own I would appreciate it very much

Hello everyone, I have a Ford 1300 diesel tractor that is leaking hydro oil from the right hand shifter boot. I looked up the diagram and noticed there was a seal and spring under the transmission plate. If I replace this seal do I need to remove the transmission plate; also what else would...

My boss just picked up a ford 1300 tractor with a 770 loader. None of the hydraulic hoses are attached. I have not got a clue where the lines go to the cylinders and the spool valves and the inlet/outlet, any and all help would be appreciated so I can keep working? Thanks John

Ok this all started by my brother using ether on it. It has the shibuaru 2cyl diesel engine. The ether use caused the piston to break at the relief points just above the wrist pin. I did an inframe rebuild consisting of pistons rings and rod bearings. I didnt have to mess with the timing or...