ferris is700z

I posted this earlier on the wrong Forum. I saw an older post on this project but it had very little good info about getting to and removing the air vent plugs on the transmissions. Any and all tips would be appreciated. My manual says the plugs take a hex or allen wrench but the only plugs...

There is an old thread about this project but one thing I cannot find is a good solution for the problem removing the air vent plugs in the top of the transmission pumps. If anyone has any help on this please let me know.

I always hated filling the gas tank on our Ferris mower as in order to get it to the full mark you had to fill slowly once it got up to the bottom of the filler neck which extended down into the tank a bit. Always spilled fuel as it reached the bottom of the filler neck and no way for air to...

Hello all... Thank you in advance for taking the time to chime in with answers to my question. I am looking to move to the ZTR zone and getting rid of my newer Cub riding mower. I have been researching different makes models, residential / commercial, specs, and the like. Since I rarely...

I decided that 75 hours was likely enough for the first transmission oil change regardless of the mfg stated 200 hours. Since tractors require 50 hours, I thought this was likely a good idea for the mower. The manual only had like 11 steps to do this and about 9 of those involved putting the...

I decided that 75 hours was likely enough for the first transmission oil change regardless of the mfg stated 200 hours. Since tractors require 50 hours, I thought this was likely a good idea for the mower. The manual only had like 11 steps to do this and about 9 of those involved putting the...