cub cadet 125

My tractor will start with a jump but won't stay running after a few minutes. Just rewired voltage regulator, but still no luck. Could it be the generator has gone bad? Any ideas?

New to the forum so looking forward to working with you all! I have this Kohler k301a that threw the connecting rod...or should I say "ate" it. It did take out a chunk of iron from the bottom of the cylinder bore. The rod broke in three pieces. The crankshaft is all galled up with aluminum...

I have a Cub Cadet 125 tractor with blown K301. My fault. Ran it too far along wear and tear as a smoker. Piston broke and it cracked the cylinder. I got myself a good block and going to swap parts along with new psiton, rods, valves, etc. So here's the thing..... going online is freaking...

i have a cub cadet 125. i'm trying to mount up the rear hitch on it and i seem to be having trouble. it has a brinly spring assist that seems to mount inside the right hand frame rail (looking at the rear of tractor) between the rail and rearend. this doesnt seem right with the limited amount...

I just purchased a 68 cub cadet 125. The owner said the battery was dead so he jumped it directly to the starter and it fired right up. I purchased a new battery and turned the key with no result. I believe the problem is either the starter solenoid or voltage regulator. How can i properly...

I'm trying to put a stack type exhaust on my cub cadet 125, I turned the header pipe so it was facing directly out and the 90-Degree pipe collides with the air cleaner, so there's not enough room for the pipe. Any tips? I've seen some people on this site with stack type exhausts on their IH Cub...

Cub Cadet

I have a Cub Cadet 125 that has a problem. When you go to start it it turns over real slow and will not start. I have changed the battery and starter. It has a 12 HP Kohler. Anyone have a solution???? thanks

I need two items for a 125 (12hp hydro, narrow frame). 1. The helper spring assembly for the mower lift arm. 2. The "float" button on the finger grip part of the mower lift arm.