century 3035

My 3035 will not start, I shut it down to adjust the Forward / Reverse Lever as it didn't always go into forward properly. I made the adjustment and went to start it and I had nothing when I turned the key. Had a similar problem a while ago, mechanic that looked at it thought it was the Clutch...

I have a Century 3035, the same one that I just had the PTO issue with. After getting it going, I was brush cutting when a steering hose popped apart at the crimp. After a couple of weeks of waiting on a local hydraulics shop to make a new hose, it is back together again. I have a separate...

I am having an issue getting my PTO to shift into gear. In fact I broke the arm (PTO Rod) that goes between the shift lever and the actuator trying to get it to shift. After the arm broke the shift lever moves up & down freely, so it has to do with the PTO Shift Lever Shaft or something...

I am looking for the side panels for a Century 3035 or Branson 3520, apparently Branson has discontinued making these. Does anyone know of a Century/Branson graveyard or know of where I might find these?

Hello All, Really needing some help. Currently my Century 3035 is layed up out of comission, with busted / blown out power steeing Hyd Hose, One of the hoses under the steering wheel column ruptured. Have taken the plastic covers off under the steering wheel, in attempt to gain access to remove...

I need the TBN brain trusts help to diagnose my tractors problem. :thumbsup: I Parked the tractor to refuel. After refueling the tractor won't start. Engine cranks and turns over, no smoke. Disconnected the fuel line between fuel pump and filter bowl and there is no fuel flowing when the key...

first off hello this is my first post. Going saturday to look at a century 3035 with 500 hours on it. The tractor comes with a loader,backhoe,logsplitter, posthole digger and brushhog. All that for 10 grand. Just wondering if their is anything to look for specifically that would make this a bad...

Hello every one, I have a 3035 Century with about 800 hours on it and the electric fuel pump has quit. The dealer I bought it new at has a new pump on hand, but his price is 170.00. I can get electric pumps all day long for alot less than that. My question is does anybody know what pressure...

Hi All...I am the happy owner of a 2004 Century 3035. I presently have ag tires all around. I would like to change these to industrial style tires. Does anyone have any recommendations for sources of wheels and tires? I am checking with my dealer but want a cross check. Along those same...

A friend of mine has a Century 3035 with R4 tires on the rear that he hates. They are 17.5L - 24. He cannot find anything in R1 in that size. Does anyone know of any R1s in that size or can anyone offer any suggestions? Thanks.

I have a friend that has a Century 3035 C-system 50 FEL. He is looking for pallet forks, part #532974920745. They are 43.5" long. It uses the Century quick attach system and they are 33.5" apart both top and bottom. If he cannot find that, he is looking for a set of 2 blank plates part...

I have a Century 3035 with only 145 hrs. Recently, after an hour of using a bushhog, the engine gradully lost power and shut down. I tried to restart and had to 'feather' the accelerator to even get it to run back to the barn. It finally died and wouldn't restart. 4 hours later it started...

I noticed last night that it seemed the Front Wheel Assist on my Century 3035 didn't seem to be working. After several attempts at engaging the FWA after going forward and backward to remove gear binding etc. I lifted the front end of the tractor with the loader. With the lever in 4 wheel...

I just purchased a slightly used Century 3035, C50 loader with 250hrs. My first tractor since on the farm with Ferguson 30, Farmal H as a kid. It has the Branson underpinnings per the dealer. It was a good buy - price/model/condition. I hope I have mad a good purchase. All comments...

Just need some help. Neighbor has a Century 3035 and has had it for about 2 years and has managed to put 135 hours on her. He has had no problems. Today he is out mowing with it and noticed hyd. fluid coming out of a breather under the seat. He shut her down and came home. Checks fluid...

I need to replace my rear R1's and am having trouble locating the appropriate sized tires. My tractor currently has Woosung 12.4-28's on the rear. This is an 8 Ply (PR) bias tire. Other numbers on the tire are W-19F which I think?? is a code describing what rims the tire should be used on...

Howdy! Has anyone installed a block heater on a Century 3035 or similiar Century? I was wondering if they have a plug built into the block for inserting an oil heater or if I would have to splice one into the radiator hose?

Howdy! I recently purchased a new Century 3035 with a c-50 FEL. So far I have 15 hours on it and am very pleased. I have one minor issue with the shuttle shift linkage. It is very difficult to move the lever from forward to reverse. It feels like the linkage is binding. It happens roughly...

My dealer is a 300 mile round trip...so I am attempting to sort out why my tractor will not start. Several times lately the tractor would not start, I would go back later and it would start and run just fine. I feel like the problem is a bad ignition switch. The light/horn switch has long...

Received my 3035 today!!! Already put 3 hours on the meter bush hogging and using the FEL to move some big rocks and moving some dirt.

Just returned from looking at tractors. We went to the Century dealer and the Massey Dealer. Got a quote of $16,800 for a 3035 with a C50 FEL. Does this sound a little high? In comparison, the Massey dealer, who didn't have any MF tractors in my size range, showed me a Farmtrac DTC 300...

Is there a list or cross reference for the filters on the Century tractors? Thanks for any information. Roy

century-ML-254482-ML-

OK, it's time to buy a rotary cutter. My dealer kind of waffled on whether a five or six foot unit is appropriate for my Branson 2035. I want to go with the six footer, but thought I'd ask what those of you who own these tractors have, and how you decided on the size. SnowRidge