case-ih jx95

I have a good friend that I'm trying to help get his hazard lights and dipped lights hooked back up. The problem is a guy that did some work on his tractor unplugged the wires from the two switches and didn’t take a picture or anything of them. So I'm looking for somebody that has the same...

I have a Case Jx 95 that I have replaced the steering fluid tank 3 times and after I replace it everything works great and then the tank will melt and loose all my fluid. Why is this thing melting my tanks.

Yesterday I hooked up to a tiller and went to engage the pto... the lever moved with some difficulty, I assumed it was just dirted up from not using it for a year. But when I let the pto clutch down to start it nothing happened. I fiddled with the levers, the engage feels out of wack but the...

I have a 2008 JX 95 that I am wanting to use to run a PTO powered trailer pump. When I back the pump into the water and run the tractor, I'm getting the "low transmission pressure" warning light. The tractor is on a ramp with a 4 or 5 to 1 grade. The dipstick indicates the reservoir is...

how do you adjust the pto will enguage ok but doesnt disenguage properly?????

I have a Case JX95 that I want to hook up to my new Shaver HD12 post driver. The hydraulic into the driver is the usual quick coupler but, the return from the post driver is a 1" diameter hose. I was told it should dump in to the hydraulic tank on the tractor. The only opening I find is the fill...

We were hauling round bales out of the field yesterday, when all the sudden the JX95 just up and died. There is no fuel getting to the injectors. We run all older IH's ( 56 and 66 series ) with the exception of this JX95 so are at a loss when it comes to diagnosing it. Any ideas or help would...

I have a JX95 and my temperature gauge is not functioning. I have power at the sending unit and I have power at the gauge. I tried plugging in a new dash cluster and the gauge did not work on it either. I then put a new sending unit on the plug and put it in water that was at least 180 deg. and...

Just picked up a 2006 JX95. I have a owners manual on order but was hoping to do a oil change in the next couple of days since it is rainy here anyway. Any ideas on much oil she holds?

I am considering getting rid of my open station 1994 JD 5300 for either cab JX95 or JD 5420 or Kubota M9000. I want a little more hp with cab but stay in the larger utility tractor category. All are MFWD. Not familar with JX line. Farmer has 2007 Jx95 for sale with 87 hours. Has 2 of them but...

Is there a place to buy or order a brush guard for the front of my tractor - I'd rather buy one than make one. It's got to have some kind of protection to keep the brush from pushing on the hood but either Case doesn't offer one or I can't find one at the dealer.

I've got a couple of pastures to maintain in South Texas. The first is a 500 acre pasture with about 300 acres of open field, sand hills, to mow and about two miles of river bottom that's got allot of over grown brush to clear...some of which I think I can get with a brush cutter. And the...

Im 99% sure I know the answer to this, But might as well ask... 2255 fel wont fit on a jx95 will it???

Looking to purchase a new tractor around 90 horse. Looking at a JX95 or TD95(New Holland equivalent). Only need 2wd since not using a loader. The biggest piece of equipment I have that I want to use it for is pulling an Vermeer 604M round baler. Technically the tractor is rated to handle the...

i have been doing a bunch of research on this site and have basically narrowed my choice down to those two tractors. Actually, after reading all of the position comments about the TN-A tractors, my mind was made up, but then i got my quote back last night on the JX95 and the price is comprable...