case-ih dx35

I had a rear stabilizer bar break on my Case DX35. Can some please tell me where I can find a replacement part? Got to admit that I am new to tractors and yes I am willing to ask for help. Did multiple search’s last night for close to an hour. New Holland kept coming up but that bar does not...

I am having a heck of a time finding parts for my case DX35. For example: a replacement rear stabilizer bar for the three point attachment. The new Holland version comes up but it is not the same. Help!

My 2004 Case DX35 was running just fine, but I had a little fuel leak in the injector pump. So I pulled the pump and injectors. I am waiting for the return of my injectors and a new injection pump from the shop, Precision Fuel Injection in Honolulu. My old pump they say had a bent part, so...

My 2004 Case DX35 was running just fine, but I had a little fuel leak in the injector pump. So I pulled the pump and injectors. I am waiting for the return of my injectors and a new injection pump from the shop, Precision Fuel Injection in Honolulu. My old pump they say had a bent part, so...

I have a 2008 Case DX35 that has developed a hydraulic squeal. It seem to be coming from the left side of the engine around the hydraulic filter but it is hard to isolate since it only does it when the tractor is in motion. I have replaced both filters and the issue has not improved. I can...

My 2005 Case DX35 with a Shibaura 3 cylinder diesel engine is leaking fuel from the injector pump, specifically from between the center cylinder penta head cap screw and the housing of the center cylinder output port (see picture). Being this is a penta head, I assume that means DFW (don't fool...

I just joined the forum after purchasing a 2005 Case Dx35 tractor with LX116 loader and rear blade. I will be picking up the tractor tomorrow, it has a few issues, one being that the loader jerks a bit during operation. I have ordered the operation manuals for both the tractor and the loader...

anyone got one? looking at one, need to know if its worth 12,000? 1000 hours on it. also it has industrial tires on it, are these any good in the woods? 75% of its life it will be skidding logs.

Hi , this is my first post on this site , I just joined . We have a Case I-H DX35 hydro tractor with a loader. The problem is the rear 3 point arms have very little lifting power. You have to rev the tractor up to get the arms to lift the weight of a person standing on the arms. The power...

I've got a DX35 that I bought with 70 hours on the meter. It has been a good tractor except for the persistent diesel fuel problems that it has. It now has 1150 hours and I have owned for about 8 years. About every 300 hours the fuel pump seems to go out (this is now the 3rd one I have...

Just bought a 2007 DX 35 with 500 hours. Need a manual or at least some guidance on oil/filters/and routing maintenance. Thanks Sparkly Hardeman PS I am a newbie to tractors but know my way around a wrench...

I have a Case DX35 which was running fine, right up to the point it didn't. It has a fuel issue, the filter bowl was almost empty. I went with the easiest first, added some fuel to the tank and replaced the filter. I opened the bleeder screw and waited for fuel to run out. Had to crank for a...

I'm trying to replace the battery in my DX35. There are no dealers close by so I went to an auto parts store and bought a replacement. Now my problem, the Case battery had little stand offs on the side of the battery which the clamps pulled down on to hold the battery in place. The new battery...

I have a 2004 Case/International Dx 35 tractor and when I let the forward or reverse pedal go the tractor will slowly keep going forward. I can push on the reverse pedal about a quarter of an inch and it stops moving. I tried to figure out how to adjust it but to me it will have to be adjusted...

I also posted this in the Case forum but tractor is dead in a bad place. Tonight I was moving some firewood around with the tractor. Stopped, put it in idle, set the brake, lowered the loader and splitter, forgot to take it out of gear, jumped off and it died like it is supposed to. Jumped...

Tonight I was moving some firewood around with the tractor. Stopped, put it in idle, set the brake, lowered the loader and splitter, forgot to take it out of gear, jumped off and it died like it is supposed to. Jumped back on, put in neuteral, no start. PTO light is on, moved lever, same thing...

DX35 Glow plug light stays on I can hear the relay clicking trying to turn it off. Is this a bad glow plug relay or is this the timer relay? May be a toss up. The glow plug light does eventually go out.

Recently I have looked at many new and used tractors in the 35 to 40 HP range. I have a personal budget limit on a payment and unfortunetly for me. the new tractors in this range with loaders are just a bit too much for me monthly payment. So that being said I have looked heavily into used...

Hello everyone I would welcome any input on the following situation. I am looking for something that will haul round bales (4x5), Rake hay, and do general odd jobs/clean up. I have 2 tractors I have looked at heavily (I actually have looked at about every brand with exception of the JD. No...

Hello everyone Been shopping around for a compact lately. I am replacing a JD855 that does "general chores" Brush hogging, equipment moving, barn cleanout etc. Recently I switched to Round Bales from Small Squares, obviously the JD will not lift a 4x5 round bale. So I have to use a larger...

Forgot to unhook battery when I welded a bracket on the bucket now the tach quit working. Any ideas manul does'nt indicate that the tach is fused.

Headed out to look at a 2007 DX35, 330 hrs, LX116 loader, 1 yo Woods BB60x cutter - $15K. Comments?

Has anyone turned up the fuel pump on a DX35 (larger frame)? I already know the potential consequences of that; just wondering how to do it and keep it idling right. Thanks!

Do they make a high output altanator

Oh man, I thought my heart was set on green and yellow, but... My local Case dealer has a never sold unit on the lot. 6.2 hours and a little rust and faded/weathered plastics. It has the LA116(maybe LX-dont remember) FEL. This unit appears to be as big as a current model DX40/45. Does...

Can anybody give me a recent purchase price on a Case DX35 with loader and rotary cutter? I'm in the market soon for a tractor, and right now, it's kind of a three-way tie between Kubota 3240, JD 3230, and MF 1533. They all seem to be kind of equivalent tractors, each with their own advantages...

I finaly pulled the trigger. DX35, Loader, Wheel weights, Grill Gaurd, PHD, BB, Rock Rake, Tooth bar, Disc, Tiller, Rotary cutter, Hyd top link, Head phones with radio, Ball hitch Gizmo, 12 box of beer. Drove it home from dealer Monday. Took three trips with small trailer to get the rest...

1. Have priced a "new" 2005 Case DX35 HST w/ R4s at $19,400 w/ 116 loader b/f $900 rebate. Tractor does not have a rear remote. Defintely a "holdover" on the lot in a slow area. Hard to get accurate read on price with age. Tractor definitely looks like it's been out for a while in the sun ...

I traded my TC30 for a DX35. After a day of playing around i'm glad I did. Can't wait to get into those dirt piles. The backhoe is a Bradco 509 and has a Bradco hydraulic thumb.

This is our month-old tractor. It's our first tractor and we're still learning the "ins and outs" of tractor ownership. Bought it at Fletcher Equipment in Troy, Missouri. Has a Rhino FM72A finishing mower used up near the house. We ordered it with the fiberglass sunshade and armrests. Had...

Before I place my order for a Kubota L3130 I thought that I should give the competition a good look. Went to the local dealer he did not have a NH but had a Case DX35 hydro which he said was essentially the same. Is this true? I drove the Case DX35 as being a close to the L3130 in terms of FEL...

I've been wrestling with buying a tractor for nearly 3 months now trying to make up my mind whether to go green, orange, blue or even red. For the past month since signing on with TBN I've been trying to absorb the wealth of information available spending nearly 3 to 4 hours every night reading...

I would appreciate input from some of you NH drivers or anyone familiar with the Case product line. Very briefly, I'm in the market for a CUT. I have 10 acres of land, fairly steep, that I recently purchased and will be doing a little bit of everything - clearing, landscaping, installing some...