branson 4020

Have a Branson 4020R that the foot peal and levee for throttle dropped working. If you use the throttle control on the console the throttle lever on the pump seems to stick but still does not accelerate with the foot pedal or the throttle lever on the console. Any suggestions would be greatly...

Does this 2 coil solenoid have a relay between ignition switch & solenoid? Does the 70 amp relay on left side of firewall under dash control any part of the fuel solenoid function? What is the function of the rectangular electrical box mounted on right side of firewall under dash? My fuel...

Need help. Early model 4020 Branson, Out moving heavy grass few weeks back and lost all hydraulics. No FEL or TPH operation. Replaced hydraulic pump, TPH piston and rings, and new FEL control valve. Most needed it anyway. Today I fire up unit and FEL works great but no lift on TPH. What to do...

Have to replace some oil in my Branson 4020. Hard to tell on the sight glass but had a leak on my backhoe Most of the oils I see online don't really give the specs. Saw some posts on here but cant find them now The manual I found wasn't really any help. I remember seeing what to look for on...

i will post pics of both tractors later,but if they were equal condition and equal cost which would you buy? i want the biggest tractor i can get for the money will be pulling box blade and useing fel, thats about it,,, they are both maneul trans, and im ok with that ,,thanks

i am going to drive this branson maybe tomorrow, i know tym bought them ,im a little concerned, tractor data says its turbo charged, motor made by kujute? has 971 hours, its a manuel,(i know hydros are better with fel, but my current tractor is a 1963 ford 4000 industrail with fel so im used to...

My name is Gregory and I have been the owner of Branson 4020 for 2 days. I need all information about branson 4020, manuals

I need to replace my front tires on my Branson 4020. I was looking at these tires. The right size. New ZEEMAX Heavy Duty 1-16.5/1PR G2 Skid Steer Tire for Bobcat w/ Rim Guard It says G2 tread pattern. They look like R4's. Is there a difference? Will they work and has anyone used this tire...

I own a 2004 2040 and now I see they manufacture the 2040R model. Can someone explain the difference(s) please? Thank you.

I have a Branson 4020 2003 or 2004 model. Doing a little digging today and heard a solid snap like something broke. I then had no power to rear wheels. Front wheels still drive in all gears forward and reverse but lost rear drive. PTO still works. Got it back to house and jacked up rear - put it...

Thinking about buying a 2002 Branson 4020. I would like to read the operators and/or service manual before traveling four hours to see it. All I can find is the 2016 4020r manual which has a different motor. My email is bamick@amicklawkc.com if somebody can help. Thanks.

Want to repair the accelerator housing, (some call it the governor). Need to know what problems to expect and how to properly dis-assemble. Engine would start once, go about 10 feet, and shut down. Fuel filter has been changed. Worse part is that I'm the middle man. My brother owns the...

Hello everyone, I am new to the forums, not new to tractors or equipment. I am having a issue with my 4020, I have owned it about 2 months and put 15hrs on it. It has a manual transmission and shuttle shift. I was moving topsoil with the FEL and noticed that I needed to take smaller loads when...

I need some more help. I put the 4020 back together today and can't get engine to start. I have fuel from the electric pump getting to the injection pump, I pulled the line off and found a good stream of fuel. I cracked the injection lines and am not geting any fuel out of #1, getting very...

I am helping a guy out with a 4020, when he was running it the coolant drain line got ripped off and he lost his coolant after he found it he fixed the line and filled with coolant, started and ran found that there was white smoke. I took the head off and found that the head was cracked at the...

First time on this forum. Of course I have a newbe question. I live in the middle of nowhere and there's only a NAPA store for supplies. I need filters for my Branson 4020. Of course NAPA doesn't list Branson in their books. I was able to find fuel and oil. Does anyone know an aftermarket brand...

Hello all, I bought a Branson 4020 a couple years ago and have been using it mainly for bush-hogging. It is overdue for some maintenance and I found a few answers to questions here at this site...filter cross-references, power steering tank cracks, etc. This has been a great tractor so far...

My father-inlaw has a Branson 4020 with an electrical problem. Basically if you turn on the lights, turn signals, hazard lights, shift into reverse (reverse light) or step on the brake. All the lights dim and the gas gauge goes to empty. The battery and alertnator are fine. I have disconnected...

I cannot get the PTO to engage. the lever seems to be working but I have to hold the clutch in and have someone put a cresent wrench and engage it to either 1000 or 540 then it stays engaged all the time. Does anyone have an ideal. I tried to adjust the clutch but that wasn't the problem. Before...

I cannot get the PTO to engage. the lever seems to be working but I have to hold the clutch in and have someone put a cresent wrench and engage it to 540 then it stays engaged all the time. Does anyone have an ideal. I tried to adjust the clutch but that wasn't the problem. Before this happen it...

I have a Branson 4020. If I park on a slight slope to the right fuel will leak out the cap considerably. The tank is about 3/4 full. The cap was replaced but still leaks. Has anyone else had this problem or is this normal? Thanks in advance. Pics attached.

OK this weekend I finished changing out my fluids. Replaced hydraulic fluid with Cenex Maxtron THF (synthetic blend) which has outstanding cold weather specs., but is an all season fluid. I used the factory Kukje hyd. filter and cleaned the pre-filter screen as well. I did the front axel and...

Looks like another possible hydraulic problem developed. Started tractor today, outside temp around 0 degrees, recycled glow plug about 7 times but started ok. I let it run about 15-20 minutes to warm it up before using any hydraulics. Went in house while it was warming up...came out and I had...

Does anyone else have this problem or is it normal? I recently had 2 hydraulic hoses blow. One at the control valve and on a different day one near the bucket.(got a oil bath from the one at the bucket ) They control the roll on the bucket. I replaced the hoses and now my problem /question is...

This probably is a dumb question but I didn't think much of it until now. I got a jump start on my 50 hr maintenance and changed the engine oil and filter. My dipstick has 6 marks on it and from the first day I owned it the engine oil goes to the 6th mark, so I assumed that was the full mark...

Any body have any experience with the branson 4020 tractor. Or any of their models for that matter. Finaly found the branson site. Had to call the site in georga to get some numbers for local dealers here in northern missouri. Called a couple of them and they're supposed to get back with...

Branson 4020 Basic Maint Q\'s Hello Everyone. I purchased my 4020 about 1 year ago after reading many, many post on this site - thank you all. I found a good local dealer who made me a great deal - as I have come to find out it was a "going out of business deal". He is gone and the next dealer...

Well, we had a great weekend here. The winds and warm weather are finally drying things out enough that I could do some backhoe / fel work. First I had to change some equipment around...like drop the front plow and rear box blade...and then I had to remount my backhoe. That took me...