blower

I am operating on a Kubota L48 with a Erskine ES2000 snow blower on the front. Occasionally the chute will rotate both directions but currently it will only rotate right. Pressing the buttons on the joystick with activate the hydraulic lines but no movement to the left. Although it was rotating...

Sorry guys, its a string machine she wants. Disregard blower. spouse wants a battery powered blower to bring along and use, at her dad's place which is 7 hours drive from us. Any of you folks using the ones Ego makes? Hows it working for you? We already have there batteries. Thanks!!!

My poor old 317 was crushed . Im tring to find a new current equivelent model. Not sure what closest canadian model would be? Any help apreciated.

First time trying that for me, and I've had near 70 winters with snow. I am impressed! 3 inches of fluff that started small. Temps today got up around 30. Question is, where does the snow go? ;-)

Hi, the mount pin on my blower broke. It’s a very elaborate part with idlers and bushings and pulleys so the part alone costs $500 and you then have to swap the pulleys, etc. Anybody with a welder and metal working skill could replace the mount pin. Contact me if you want the part.

I am looking around for a snow blower for this winter. For sure, I will need one. My soon to be regular driveway will be 1500 ft long and gravel in Northern Minnesota. My tractor is a JD 3039R. I'm looking at a SB1174P Frontier inverted blower that is 74" wide. The 3039 is "rated" for...

About a year ago, my wife bought a cheap, $24 corded leaf blower on Amazon that I figured was a waste of money. She wanted to blow off the deck and didn't want to spend the money on a cordless Makita, which is what all my cordless tools are. I sort of rolled my eyes at her decision, but...

I bought this 6 ft blower a few yers ago , i removed the crank handle for the chute and installed a 12v winch. the blower works great but there's no name tag or label that was on it when i got it and i would like to know who made it. Anybody got any idea or seen one these. any help would be...

I'm trying to run a Ventrac KA160 Blower with a 430 Max power unit. The 430 has the air-cooled Kohler. The Ventrac manual specifies a B52 belt however, that belt is too loose even with the adjuster turned all the way for max tension. Is there another belt beside the B52 that I should try here...

Does anyone know if a Kioti rear mount SB50 will fit a Kubota BX2380

Yesterday at a flea market I picked up the above blower for cheap. I am getting a little frustrated with it.. it will run on ether (just enough to test). But it is not getting gas. Pickup Filter is relatively clear, fuel line is in good shape. I want to get a rebuild kit for the carburetor...