bleeding injection pump

Stupidly ran my Ford 1700 out of fuel and haven’t Ben able to successfully bled the fuel pump and restart the engine. Have Ben opening the bleed screw on the fuel pump while cranking the starter, but no success. Just getting a little bit of pulsing foamy bubbles every time, after about 20...

I recently replaced a few seals in the pump. I replaced the: - large o ring on the head = gasket on fuel inlet - main seal(with spring facing inside) - o rings on the throttle and stopper shafts - strainer and fiber washer where the return line comes in - control cover gasket - all the washers -...