3-point hitch

This is fun; after spending some time with the box blade, pushing and pulling, the 3-point has taken upon itself to not lower. I checked all the physical links between the control lever, I adjusted the drop rate in both directions repeatedly, I've taken the seat off and inspected what I could...

I have a Masey Ferguson 2607H with 25hrs on it. I have attached a 3-point attached backhoe and that works fine for digging. The backoe is PTO driven, no other hydraulic connections. The levers for moving the 3-point attachment are not touched, i am sitting on the backhoe and suddenly but the...

I've got a 2022 TYM 474 and had a good year with it so far. Been doing lots of loader work, and now I'm looking to use 3-point hitch to do some tilling. To my dismay, it doesn't raise up and down. I tried while sitting (and i can see the back level go up and down to), but not working from...

Greetings! The three point hitch on my Yanmar 1720D has never worked right. I've finally decided I need to solve the problem because I have a bunch of posts I need to put in. It goes up okay, particularly when it's cold and before I pick up the loader. It even comes down most of the time in...

Hello to all, I posted this on another Thread but thought I would start one myself so I copied over the posting. "My 3-point just stopped working, one minute I was adjusting the mounting to attach the Brush Hog and next it wouldn't lift. Funny ! I looked for any linkage that may have come...