1025r

Is there a way on the 1025r to lock belly mower lift mechanical in the up position when the mower is removed? Thanks

Looking at Brotek… 1.4” or 2.0”. Nothing for the front wheels initially. Is there an optimum size choice here? I do not run a MMM.

Flew back from California the night before, got up early and did six driveways in the neighborhood. This Virginia storm was perfect snow and little to no sleet/ice where I am at. I strapped four suitcase weights to my rear blade and attached PVC to the loader edge. The tractor impressed as it...

Printed a while back, but finally got it installed. A replacement mount the LED lightbar on our JD 1025R. The prior mount used U bolts & aluminum channel, and was pretty butt ugly. The lightbar is longer than the straight portion of the ROP top so extensions on the clamps were needed to...

The front bell crank in the brake linkage can fail causing the tractor to lose braking, resulting in a crash hazard. John Deere Recalls Compact Utility Tractors Due to Crash Hazard

I'm considering getting a tractor. I've noticed in my area there are many used low hour JD 1025R tractors at dealers and on Facebook marketplace. Some have as little as 5 hours on them. Is this the same across the US? What are your thoughts on why there are so many used 1025R tractors...

A 2016 John Deere 1025R with Powerflow Material Collection System! $15,000 less than new! At 247 hours, this 1025R is powered by the 23.8hp Yanmar 3TNV80 diesel, 3-cylinder, liquid-cooled engine with a 2-range hydrostatic transmission. Equipped with the 120R loader and JDQA bucket, and the 60″...

Got quotes from my local JD dealer (KY) for my first tractor. Are these prices reasonable, or should I run away? Salesman says there's no more room for savings. 1025R TLB: $15,970 120R Loader w/bucket: $4,788 260B Backhoe: $7,662 Also getting radial tires, ballast box, 3rd hydraulic function on...

Happy New year everybody! I got to spend the second day of the new year on my tractor moving snow while it was around 0 degrees Fahrenheit IN A CAB! I bought this cab before Original Tractor cab released their dedicated BX23s cab design so I had to improvise on a couple of steps to make it...

Hey all I hope everyone is doing awsome! I wanted to share my experience with the WoodMaxx brand FM54 Flail mower on my Kubota BX23s. I hope this video helps anybody out there who is on the fence about getting one of these. In the video I asked alot out of that little flail and it...

Top Link with Rear remote install. Full post of installation of the Summit kit. Should work for most any tractor that has a power beyond port, such as for a backhoe.