Search results

Thank You, I remember something about those posts, it has been fine up to now, so I doubt I have the rust issue, but a seal or seals may be leaking. I could maybe run a ball hone in the tube just in case. It does make mowing a pain, constantly steering to go straight.

Last spring I had to rebuild my diff lock as it was completely destroyed. After I finished I had a drifting in my steering, I have to constantly turn very slightly in order to keep the tractor going straight. I thought maybe there was air in the lines for the steering, but it never did go...

Okay, I have a leak on my lift cylinder connector. There is a plug on the top of the square connector where the hose attaches. I see the O-ring blown out, sticking out from under the plug. I have the parts breakdown and number (75590-13270), but I didn't notice how the plug comes out of the...

I will post pictures of the parts tonight or tomorrow, (camera is at home) maybe Monday if my home computer gives me trouble, that is the next thing I need to fix. Anybody know anything about why my screen scrambles or goes blank? I'm thinking video card? I've never posted pictures here so I...

Yeah, I was quoted 15 - 20 hours AFTER I already had it removed. $50 hour. This was not at a Kubota dealer but a reputable tractor repair shop with 3 ex Kuboata techs, I think the dealer must be quite a bit more per hour, I didn't ask. OUCH. So I decided to just do it. I am mechanically...

I heard a loud noise lately while turning so I knew something was broken. Removed the transaxle 2.5 hours, pressure washed it and tore it down and found the broken parts. I found the differential carrier $275, shift plate $60, and shift fork $90, broken. Also replace a few bearings for $20...

Yeah BX2200, I don't know if I've lost my mind, or if it is just a Monday thing. Must be just impressing the heck out of all you folks. And I spelled Hydraulic wrong too on the first post!

Gee I thought you guys were good! No really I feel pretty stupid about that, and I was a service tech for 10 years! It is a Kubota BX2000.

I was wondering if anyone had the part number for the steel Hydro line that comes out the side of the tractor for the loader. It is the center one of the 3 lines that I need. It had worn through where they come through the bracket that holds them down. It is a short section that goes from the...

We moved a 12X60 with a F-250 with a hitch ball on the front bumper about a quarter mile. It was full of furnishings etc. The truck was slightly light in the rear but it moved easily in four wheel drive. Not what you are asking but use it for what it's worth.

Its been in three times, they said they couldn't get it to do it until the last time, now they blamed it on low hydraulic flow at low rpm. It happens at WOT or low rpm. They are the only local dealer. I left it there a total of ~3 weeks. I am aware of the 3 point lever, that is one thing...

I moved the 18 yards of crusher dust last night and paid particular attention to the loader. The bucket will go into the "floppy mode" even when the lever is not moved into the detent on the right. Actually it is quite noticeable when you do go into the detent, the level pops in with fair...

I know it does have the float position for the loader. I meant there isn't meant to be a float position which would cause the "floppy" bucket. I will be using it tonight for another 18 yards of crushed gravel for a paver project. I moved 12 tons of fieldstone, probably three times that of...

I do have the 4 way valve. Could that be it? Maybe sometimes I move the lever all the way and sometimes not. I am not leaving it in the detent position I'm sure. What is the detent position for exactly when using front mount options? I just never found a common cause, I'll pay more attention...

I have a question regarding the FEL on a BX2200. I have had mine for 115 hours. Mostly loader work on the new yard, no grass to cut yet. The question is since I've owned it it has acted strange at times, no curl once in a while, that has since gone away, now the biggest problem is that...

I was wondering if anybody ever used a brillion seeder with their BX2200. It is listed at 788lbs. Any thoughts, I have 2.5 acres to plant grass and the local co-op rents this particular seeded. I know the seeder works great and would like to use it. If the tractor can handle it. thanks