I am still fighting a glow plug issue. It starts hard in the cold unless I use the block heater for a couple hours. The light on the dash for the glow plugs may or may not come on when the key is turned to the appropriate position - it is sporadic. If the glow plug light does not come on and...
I have a TC29D with 72" 914a side discharge. I have always been unhappy with the way it mows using the standard blades. I purchase the high lift blades from Messicks NH, non mulching, and the mowing quality is much much better. I suggest high lifts for anyone concerned about the quality of...
I have 72" mid mount side discharge mower from New Holland. I've used it about 4 years. It has the hard antiscalp wheels. I mow about 4 acres of lawn weekly during the season.
The wheel bearings on the antiscalp wheels fail once to twice per season. They just flat wear out and fall apart...
I have a TC29D with 881 hours. I use it mostly for mowing and then odd jobs here and there around the house. Yesterday I was mowing and the shaft from the water pump that the fan is bolted to sheared/broke. I suspect the bearings tied up in the water pump which caused the shaft to shear.
The...
I have a TC29D with 750 hours. I used it last week and it ran fine. Parked it in the unheated garage. It won't start now. It cranks, kind of spits/cranks fast, spews out loads of blue smoke and generally won't do much more than that.
I cleaned the fuel filter bowl, replaced the fuel filter...
I have a TC29D hydro. I was pulling logs out of a woods this weekend with a boom pole on the 3 pt hitch. I was being careful and trying not to abuse anything, but I was pulling/lifting some heavier logs.
Well, the 3 pt seems to be working fine except that (now) once the tractor is shut off...
Any ideas?
I have a 914A side discharge mower that keeps tossing the left side (away from chute) blade. It's done it twice this year. Either luck or symptom, it always does it when "spinning down" after I disengage the PTO. I hear this metallic chink noise and then the blades laying in the...
Getting ready to upgrade...I hope
Selling outright-what do you think I can get?
TC29D 4x4 Hydro 300hrs mint shape, Industrial tires
72" MMM with 7308 loader
All like new
Buying price for new?
TC33DA 4x4 Hydro, supersteer, industrial tires, 72" MMM and loader
let me know what you all...
Just what every NH TBN'er needs: a 1:18 scale Busch Series New Holland race car. Pretty nice unit with great detail.
I bought mine last week from a NH dealer...paid $35. Pretty cheap now at $20 on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3580008281&category=225
I found a company that offers various 3 point hitch equipment for 40hp and less tractors.
I found it particularly interesting as it came in a nice shade of blue. ;)
Visit http://www.tartergate.com/products.html and look for the 3 pt section.
I was given a pretty nice 6ft three point disc. Works like a champ on my TC29D FWD.
Since I have the disc I really have no need for a rototiller. They are nice and my buddy has one, but I would not use it enough.
However, the disc won't turn the soil in some cases.
My question, can my...
I have a TC29D with hydro transmission. The dealers told me on delivery that there is no need to use the clutch to change speed ranges (I, II, III) and front wheel assist.
The manual on the other hand says to use the clutch whenever selecting the gear range or FWD.
I can change either drive...
I need to sharpen the blades on my 72" MMM. Looking at the owner's guide it recommends special spanner tools. Is it possible to just remove the blades with an open end wrench, lots of muscle or leverage and a few blocks of wood to hold the blade tight?
If so, are these bolts holding the...
I have a NH TC29D 4x4 with R4. The thing only has 50 hrs on it and I noticed today a slit in the tire. It is near the center and has a 1" slit in the outermost rubber, not in the tread. There seems to be a harder rubber underneath it and it is not leaking any air.
Should I be doing anything...
Any thoughts on this one?
I have a TC29D with 33 hours on it. I use it primarily for mowing 4 acres with a 72" MMM. I first noticed the problem at 25 hours one time, and then again at 33 hours last night.
After mowing for an hour or so at full throttle then I idle down. (Once to shift into...
I need to invest in a blade to handle ocassional general leveling of dirt and snow removal. Any opinions on box blades versus the regular old scraper blade?
What size do you suggest for light work with a TC29D?
Thanks
I have a NH TC29D. I don't see where they have a grass bagger attachment available and was thinking of making one.
I envision a container of sorts attached to the 3 point. If I wanted to get fancy I would hook up some hydro cylinders to open the container and then eject the contents. Maybe I...
I am a new owner of a TC29D with the NH loader. The baby arrived last week with the loader and 72" MM installed. I wanted to take the loader off to roll the yard...now I have problems.
When disconnecting the hoses I noticed the red hose (bucket dump) came off quite hard. I worked and worked...