Search results

I wish i would have taken a pic of the original but i forgot :( It reminded me of the air cleaner from the 64 Dart I'm working on with my brother. lol... The worst part was when taking out the element it was really hard not to have dust go right down the intake. Also mitered joints are...

I decided to upgrade the engine cooling on my dozer. Hopefully this will prolong the time in between blowing the radiator out. I added and engine oil cooler, and booster engine coolant cooling as well. I used the thermostat by pass ports for the coolant circuit and then used a sandwich oil...

The original location of the throttle lever wasn't very good for me and I'd always bump it with my leg when operating the dozer. It didn't take long for this to become a major annoyance, so I took some time to relocate it to a better spot. I was able to reuse everything like the cable and...

So i took delivery of a Nortrac 35 XTD (with laidong 4L22-TA engine) i have been going over it and been doing some putting around getting use to it since this is my first dozer. I have some questions I'm hoping some other nortrac/yuchai owners can help me with before I get upset with northern...

Hey guys! I'm getting to the point where i might finally be able to make some things I've always wanted to do to come to fruition. Due to emissions restrictions it seems like imports of chinese tractors and dozers have slowed down so I was hoping to get some input from the community in order to...

I was wanting to check the clutch free play on our 2810 gear but in the service manual it doesn't say where the free play distance should be measured. I'm not having any clutch issues but I'm over 600 hrs now and have never adjusted it and wanted to make sure I take care of the clutch the best...

Just got this is my email from ASAP (tractorpartsasap.com) and thought I would share. Free shipping code: FS13 $50 min. July 4th - 7th Now I have a good excuse to order a new seat for the 706. :P

I have been working on getting our 706 back in running order and have been saving a lot of money finding aftermarket parts and even parts the dealer said they could no longer get. I have put a lot of time and effort into it and was thinking too bad there isn't a central place to add this info...

Okay I have been attacked like 6 times now and stung twice by these black colored bees. And they always attack my head/face. They are roughly the same size as a regular honey bee (have those too) except instead of being mostly yellow these are mostly black. you know if you see one flying past...

I'd like to put in all new seals in an old implement cylinder. No clue what it was originally on and it is just rust colored no stickers or maker stamps. The places that I have found online all list kits by make. it is a tie rod type with 3" bore with 8" stroke with 1 1/8" rod any ideas?

Just wonder if anyone knows where to get inner tubes for a 2810 gear with industrial rear tires. size is 12.5/80-18 Looking to ballast the rears, but I want to protect the rim.

At first it was intermittent, but now it doesn't work all the time. unfortunately I lost my service manual :( so hopefully someone can help. I have 12v to the solenoid so it's not a wiring issue. So I'm wondering if the solenoid can be taken off leaving the hydraulic part still on or if has to...

Thought this would be a fun thread to post a picture of the hour meter on your mahindras. 2810:

I had replaced the seal once already, but that was before I learned about the RTV silicon trick from a member here (a dealer I think). The best part about doing the PTO seal is not needing to drain the transmission. Just jack up the rear end, park on a steep hill, some ramps, ect. This will...

I have always had an absurdly stiff throttle lever on our 2810 gear. so I finally got around to fixing it. Take off steering column covers. 3 bolts on the bottom, 2 bolts on top. They are #3 phillips head. http://i40.tinypic.com/1zv4y6b.jpg http://i40.tinypic.com/2cggd9f.jpg Unplug the PTO...

As promised here are the pics plus some brief explanations of what I was doing. Hopefully this is helpful to others. wheel and 3pt arm removed, oil drained: http://i41.tinypic.com/oj35td.jpg Loader brace and bottom axle bracket removed: http://i44.tinypic.com/e712si.jpg fender to axle mount...

2810, new style, gear I'm putting in a new rear axle oil seal, and I have misplaced my service manual. I'm hoping someone can give me some torque specs for the: rear lug nuts, axle housing bolts (the ones that go around the bell shape to the transmission) the seal/bearing retainer cap on the...

bought a new air filter for our 2810 and went with wix #42276 per their app guide and thought I would share a few comments about it. Ordered mine from rockauto for $19 (just do a part number search) The only thing different about it was the rubber seal on the back was a different design and...

Just a thought I had.. Never can have to much filtration IMO what do you guys think?

2810 - gear. We have a ton of cactus on our property that we are clearing and like not having any flats because of the sealant that is currently in them... But the rear end of the tractor is a little light even with a box blade on the back. With many difference operators, it has had several...

I'm just curious as I bent one two days ago. I really wish I would have taken a picture of it bent but I didn't think of it until I straighted it back out. What was I doing you wonder? Well I was using the rear blade on the box blade to push a tiny little 3 inch stump out of the ground. I...

Just did both front wheel seals on our 2810 (208 hours). Did some loader work for about 30 min. to check for leaks and found none. It sat for a week and when I was running it I noticed it leaking from one of the seals about the same or worse than the old seal. The other wheel is doing just fine...

A relative got a 2810 4wd with shuttle shift and I have a few questions. He got it used with 180 hours on it and it didn't come with an owners manual. It leaks a little from the bevel gears on the front end, which makes it collect dirt on the inside of the front rims. I took the top plastic plug...