Search results

I want to do the 50 hr maintenance on my BX25 and in my mind UDT2 was synthetic. Even though it states "Superior Synthetic Performance" the MSDS sheet is here: https://www.kubotausa.com/docs/default-source/safety-data-sheets/product-name/kubota-super-udt2-2_2-5-ga.pdf?sfvrsn=c6068022_2 (as...

In the mean time the grass was still growing especially after the recent rain. I looked at the variety of posts having to do with a BX and deck belts and ultimately bought a new belt and new tension spring in case mine had grown weak in 21 years. With the new belt and spring installed the...

Ok so it often pays to do a search to see older discussions rather than reinvent the wheel. I’ll resurrect this old thread. A couple weeks ago I had a problem where the middle blade on my bx2200’s 60” deck wasn’t cutting so I tightened up the bolt on the center blade and it cleared up but I...

Thanks DieselCrawler I was considering that way to go but in my mind I could never justify that the crossbar being as heavy as it is could be bent so far while mowing. Yes there are rocks in the area but who on this board never hit a rock with a bush hog? I put a C clamp on the cross bar and...

Hi Guys I have a Satoh Beaver that I have used to bush hog around the place here. A couple years ago I was mowing the same trails as I had for several years but must have just caught a rock right (wrong) and bent the crossbar resulting in a horrible noise. I checked a few places back then and...

Hi Guys I have a good friend who spends many hours each week mowing at a local cemetery. This is a volunteer position and not a paid position. Due to all the headstones there is a lot of trimming. He had been talking about designing and building a deck mounted string trimmer that would have...

I had a couple hours in it yesterday and got started- got the back left wheel off and got the fittings under the dashboard disconnected and got rear fittings loose before I had to get ready for work. Today I fished the rear hoses out of the protective sleeve material and removed the front left...

Hi Guys I have been on TBN for a long time but have been not too involved; it seems there is more to do than the amount of hours in a day allows. Anyways I was in a hurry to get the grass mowed tonight as it is looking like rain. I jumped off the tractor to move something and when I went to...

Hi Guys I had been doing some research on ways to save money on fuel (anybody else done that?) and came across the ebay auction referred to in this post (below). There's a mention of another thread in the Dodge Diesel Truck forum where several guys bought the plans. One guy in TX bought the...

Hi All I changed the engine oil on my Beaver last nite and in the process I saw the rubber plug on the corner of the gear box by the shifter and popped it off to see inside. There was very little oil in there. I had been having trouble with my right brake hanging up first and later the PTO...

Hi Guys Maybe this should have gone into the parts/repair forum but I decided to start here. I have had this tractor for about 5 years- it was part of the deal when I bought my home. Today I was using the bushhog but nothing out of the ordinary and it broke. I am not sure of the terminology...

Hi All I have read with great interest all the banter concerning tillers over the last few weeks. I am in the market for one to use with my BX2200. I started by doing something I don't always do - CONSULT THE MANUAL. Kubota recommends that you should only go up to a 42" tiller weighing at...

Hi Guys I haven't been here for a while but I ran across something on ebay that looks like a good deal and the seller lists these over and over. I'll drop a link that searches ebay for Kubota Mower Blades- <A target="_blank"...

I had posted the message below yesterday- 2/13/01 in response to the thread TresCrows started. Seems it may be getting overlooked and thought others may benefit from a discussion about the upgrade. To me, knowing what the actual lengths of the new components are for the 3 Pt upgrade vs. the...

Hi Guys I have a situation where I have broken the steering arm on a B7200 and even still am unsure how it happened. I was using the loader to push brush onto a pile and then was backing and heard a thump- immediately had no steering - I have a picture here that I'm going to attach to make my...

Hi All I used this board fairly extensively when researching which tractor to buy and really like all the benefits of getting ereryone's opinions. (Bought the Kubota BX2200) I have 12 acres here that we bought late last year- the side yard (pronounced "field") was very rough and not at all...