Search results

Thanks dado. I have one coming from the manufacturer so I’ll be getting it swapped out.

Well, I gave it a few whacks with a hammer today then tightened the nut. After working for a bit longer, I got some more but since then it’s been pretty much solid. I guess the bolt has just been finding its home. Thanks for all the input guys!

It’s the Woodland Mills WG28. It has a slip clutch too. The taper bolt is on the end that connects to the grinder. I’m absolutely loving the grinder though!

Thanks for all the help guys! They didn’t publish a torque spec with it. I noticed today I didn’t get as much nut movement, which makes me think the tapered bolt wasn’t fully seated and I’ve been slowly pulling it in. In hindsight, I probably should have given it a few taps with a hammer to seat...

I actually found it after it came out. It’s so short that I can’t get a split ring lock washer on there. I got a nyloc nut and the end of the bolt sits flush with that when tightened. I’m nervous I’ll forget to check it routinely.

Thanks Spyder. Great point. Do you know if they’re standard diameter? I’ll have to remember to bring my micrometer out there next time to get a measurement.

Any other thoughts on this one?

Thanks ZZ!

Thanks! You’re talking about drilling the coupling so it’s a straight hole?

I just picked up a stump grinder that uses a conical bolt to secure the PTO shaft to the implement side. The shaft has a clutch so I don’t think it has a protective function like a shear pin. The nut backed out and it came apart. By some miracle, nothing broke and I found the bolt. I bought a...

Turns out Titan brands them as a R4 and they’re 6 ply so I should be fine. Mods, feel free to delete. Thanks

Thanks guys. Turns out Titan brands them as a R4 and they’re 6 ply so I should be fine. Thanks again!

Thanks. Any chance you could let me know what type of terrain you use it on? Rocks, sticks, stumps, mud? Thanks again!

Looking at a Kubota L4802 with the Titan Trac Loader II tires (Kubota exclusive) on it and wondering what people know about them. I’ve always used R4 industrial tires for their puncture resistance because I’m out in the woods mostly and worry about little stumps, etc. The R4s have always worked...

Looking at a Kubota L4802 with these on it and wondering what people know about them. I’ve always used R4 industrial tires for their puncture resistance because I’m out in the woods mostly and worry about little stumps, etc. The R4s have always worked for me but I have a feeling it’ll cost me a...

I’ll add that I just had a third function installed. I can’t say for certain if the noise was there before or not. I figured I’d try to get all inputs first. Is there something they could have done during the install that would cause what I’m hearing? Thanks again for any thoughts.

Thanks Willy. Anyone else? Air in the system?

EDIT: I’ll add that I just had a third function installed. I can’t say for certain if the noise was there before or not. I figured I’d try to get all inputs first. Is there something they could have done during the install that would cause what I’m hearing? Hi, new Kioti DK5310SE (hydro) with...

Turn it over. :rolleyes: I feel like such an idiot. I bet that’ll work. Unfortunately, it’s leaking so I’ll be replacing pieces. Thanks everyone!

So I was messing around with the box blade and my brand new hydraulic top link and noticed the blade was acting funny. Then I noticed the check valve assembly and one of the hard lines was making contact with the tractor frame when I was full up. So now I need to replace the hard lines and...

Thanks guys

I just picked up a used 3 pt rotary spreader for Pelletized lime and fertilizer. I plan on rinsing with water after use but was wondering if there’s anything else I should be doing after using it to prolong the life. Any type of spray or anything? I don’t have power or running water where I use...

Then I guess I’m back to luck. Thanks for the info!

Thanks! Any downside to going with 10” travel? I’m not sure if it’s a common one but something like 18-28” to be safe? Thanks again!

Thanks Mtn! Very simple and I like simple! Hoping someone has experience with the tractor since it’ll be another month or so until I can get out to the land and at that point it’ll be work like crazy time!

So I’m looking to pull the trigger on a hydraulic top link for my 2022 DK5310SE and I’m surprised how many options and sizes there are. Dealer wasn’t too clear on it. I’m going to go with one that has check valves because he was telling me about a customer who had issues blowing o-rings. I’ll be...

Put your hand on the bottom of the steering wheel. Move it right if you want the trailer to go right and left to go left. Takes away having to remember to reverse directions, etc. I agree with what others have said. Pay a little extra up front for a longer one. Otherwise you’ll end up with a...

Started with a 25 hp for my hunting land. Used it with the grapple and 4’ tiller and box blade for fighting tooth and nail to establish trails and small (.25 acre) food plots with the grapple. I was fretting over spending another $1500 for the 35 hp model with rear hydraulics. Fast forward four...