Search results

Hi sorry let me attempt to be clearer. I first lifted the front wheels (actually all of them engine running put it it gear in 4wd, only right rear was turning nothing at the front wheels, could turn either front wheel in either direction no resistance and no alternate action from the opposite...

Needing some help with this. 4wd seemed to be working when I got this li'l beast. Not it definitely is not. Pto shaft coming from transmission turning, splines on shafts although worn a bit are good, when I disconnected shaft and or before I could turn each front wheel independently, with...

OK, I did this I got between 2-3 maybe 4 V AC on the 50 volt scale (not good at reading those analog meters), no matter which way I connected two of three wires to meter.

Hi all just wondering if anyone knows where to source the best prices and selsction for rear tires for a Kubota B6000. i thinnk this little unit still has the original Bridgestone "rice paddy" style AG tires on the rear. It's a 4wd and has Carlisle AG's on the front as well. When replacing the...

Hi all, new here. Recrntly acquired a B6000 with a fel and a backhoe. Found fan-belt had been replaced but somebody didn't reinstall the tensioner. When I figured this out and sort of got some tension on the belt, I see from motor running charging system doesnt seem to be working. Only 11 volts...

Hi all there may be somewhere my questions answered on here but asking for help anyway. From what I can determine after recently acquiring this little unit c/w fel and small backhoe. I've posted some pics of the unit regarding another topic as well. I think it a 1973-1977, range. My charging...

I hear ya. Anyone know the output in volts of the dyno at any of the 3 wires. Then maybe will have to verify the rectifier condition

No, i didn't do anything rough that would have broken anything but the previous owner/s probably did n then attempted to cobble it to work but not very well.

what's your email it might be a bit easier to send pics that way. Argh!!!

I hear ya there. Well on mine there doesn't seem to be any splines (unless the morons before me did something), I'll take a pick and try n send it ans what I did to fabricate a locking mechanism.Maybe my steering wheel isn't even the one for it, but it works gooder now.

Now that it's warmed up a bit. I had the opprtunity to remove the steering wheel, and cobble a locking means to stop the wheel from spinning on the shaft under the centre nut. There is no spline on this shaft, but under the hub there are some flutes. I ended up cutting a piece of 11/2 " pipe and...

Is/are there rebuild kits as well as bearing kits availbke for this engine.

Ended up having a professional welder do the job and fabricated the mounts as well

I've watched a video on re & re on a yanmar/grey tractor steering fear on a site called bundybearsshed.com Pretty informative guy. I sent gim an enail about tge kubota B6000 if theres any similarity.

Not entirely sure. No actual identifiable markings. I took some pics of a similar newer hoe on an LA340 and the number of tth hoe was BT603. A tich heavier duty than mine fer sure. I'm finding other issues such as in mi us temps, the steering won't turn, also not entirely sure whar has happebed...

I might agree byt I dont see how it would affect the mechanism from the steering wheel through to the pitman arm.

Hopefully yes. Figured it was better to have a welding shop fix er up gooder than I might be able to do. Not that I didnt have the same idea to add a reinforcement plate but I didnt have the equipment and or experience to tackle the job. Heck the old weld I barley got the hoe touching the ground...

I hear ya. I'm not entirely sure but think the how and fel may have been adapted to this machine.

Thanks I'll have to check that out. I just found i couldnt steer the darned thing in the cold.

Just some pictures of my B6000 l'il unit.

I hear ya, well for starters the unit cane with a new fan belt on it but someone potentially the second previous owner (guy befire the guy i bought from) probably put it on but didnt put the belt tensioner on. It was in a plastic bag zip tied to a jug of kubota oil. I figured out put what it was...

I hear ya on that I hear ya on that. I'll probably put it on charge today n see. Still gotta learn the characteristics n stuff about this little unit.

Hi, and thanks for the compliments on the rig. I know nothing about the attachments but the guy I bought it from said all the hydraulic hoses had been recently replaced presumably before he got it too. I kinda suspect the person I got it from probably broke those anchor points and had an amateur...

They appear orange in color. I'll begin with that but with a meter on battery terminals when running only shows 11 volts. the guy i bought it from said it was a new battery and looks fairly new. I'll have to verify the rectifier is good and the volts at the dyno connections are as they should be.

Dunno really was a profeessional welding shop who did the work.

Dunno was a professional welding shop more likely an arc but not sure.

I hear ya on the size. Up to now i hadn't seen any around my anticipated price range. So now I gotta work out the few bugs. Gotta educate myself with the dyno charging system and get that working, also the steering as it seems like it's frozen in the minus temps. Almost like the transmission oil...

Hi all, recently recently acquired this little unit. Wondering if these attachements are kubota or not. Ive posted some posts regarding the tipper arm hydraulic cylinder mount tabs which had been welded (not very well it seems) prior me buying it. I ended up taking it to a professional welder...

It should be good now! Lol

I ended up taking it to a pro who fabricated new attaching moints and welded a reingorcing plate the welded er all up. Now i can lift the rear of the tractor with the bucket so should be good now

Meh more like a clinking sounds.

Hi all, recently acquired this unit. Tryong to find out what the steering box assembly connects to inside the transmission then to the ouput arm outside of the ttansmission. Is the oil in the transmission lunricating the gears at the bottom of the sterring box assembly. My question for asking...

Hi all, new here. Recrntly aquired a B6000 with a fel and a backhoe. Found fanbelt had been replaced but sonebody didnt reinstall the tensioner. When I figured this out and sort of got some tebsion on the belt, I see from motir running charging system diesnt seem to be working. Only 11 volts at...

Can't view those attachments message says I don't have permission.

Here's the pics. Its a Lincoln Mig pak 10 110V wire feed.

Here'some some pics. This crappy weld I didn't even get the bucket to the ground and barley stated to drag and rotate the bucket and "clink" the weld broke. So dunno what they used for a welder? Currently other than renting a second Uhaul tariler I have nothing availbe to take the machine to a...

I'm in Ontario Canada between Kingston and Napanee.

Hold on a sec LD1 I haven't had a chance to get back to the replies I've received. As you may e able to see the previous break actually tore out a piece of the metal under it and they didn't shore it up with a reinforcement plate under it before attempting the fix, and it's on a bit of a curve...

Here's a couple of pics The screenshot pic is from a strangely similar maqchine to the one I acquired, the other two pics are of the machine acquired.

My unit has B6000 right on the hood as appears to be original decals? It also has a small backhoe on it as well, driven by the PTO, the loader appears to be drivien by an engine mounted pump, there is a hydraulic line from the engine mounted pump back to the hydraulic reservoir sitting...

Thanks, found a couple of downloadable manuals.

Ki Kinda sorta more like a clinking sound.

Hi all I'm new here. Just acquired an older B6000 with a loader and a backhoe. I'm kinda concerned about the way the motor sounds. I'll have to figure pout how to upload a video.

What do you know about the older B6000 (73-77)

Hi all I'm new here. Just acquired an older B6000 (73-77?) with a loader and backhoe. No Idea of hours as no meter on it. I just changed the oil ( was told it had been changed recently ut it was pretty black, but...) I initially googled about this model and seemingly found that the B6000 wasn't...

Hi I'm new here. Just acquired a kubota B6000. It has a loader and a backhoe. When I bought it I noticed one of the hydraulic cylinder anchor points had been obviously welded. Well figuring it was done well I wanted to try out the hoe. Well wouldn't ya know it I hadn't barely touched the ground...

Hi I'm new here just acquired a kubota B6000 with loader and backhoe. I'm attempting to source a couple of rear AG style tires 7-14.

Hi, I';m new here. Just acquired a Kubota B6000 with loader and backhoe. Not entirely sure if thy're OEM but... I'm looking for some decent used parts if available like the headlight assemblies used, or some suitable retrofits.