Search results

You didn't say what state you are in but you are right to fear the wetlands permit. Usually your best defense is that you must have the construction to avoid diminishing the value of the property due to not being able to access both sides of your property. FWIW an abutment and beams is the...

I can't find Rotella T4 on a regular basis for the last 4 months - my usual vendors include Amazon, Walmart, Autozone and Home Depot. Have to buy it when I see it, and the prices are up!

Having recently used my T6 to unload a truck of rebar, Terramite does work well as a forklift, IF it is a 4wd so that you still have traction. But beware of stability because the weight is over the front axle that rotates, not like a fork truck/skid-steer where the front axle is fixed. If I...

Sept 2020, I paid $9750 for a 4wd T6 888 hours, lots of new hoses and spare parts and in pretty good condition. Compared to the Kubota TLB B26 at around $21k the T6 was a steal. Of course the Kubota would probably have been a lot more reliable, but would not have the power. There are not many...

umm, I think with the radiator temperature at 180 and blowing hot air across the oil cooler the 140 degrees on the oil tank sounds right, and is also my temp gun reading on the hot tank of my T6. Maybe this is why the Terramite uses oil instead of hydraulic fluid? You will notice the...

Thanks Dart! We were able to solder the old one back together and I hope it holds up because I never could find a radiator that would fit with the correct sized/location hose connection points.

Help guys, trying to source a radiator for the T6. It's marked Denso 122000-0631, I can't find a source or cross reference anywhere. It broke loose from the frame at the bottom and vibrated a hole into itself!

Help guys, trying to source a radiator for the T6. It's marked Denso 122000-0631, I can't find a source or cross reference anywhere. It broke loose from the frame at the bottom and vibrated a hole into itself!

Typical T6 single cylinder FEL

Looks like you got a great deal to me. Here are some motor mount photos of the older of T6 with Perkins. Radiator mounts on the left, Motor mount on the right

You can see from the discoloration, this crack along the bottom edge started years ago. Check your T6 to see if you have the same problem.

Congratulations Matt. I love my T6, it is a tough little machine. Biggest issue I've had was about half the hydraulic hoses were original to the machine so they all started blowing out. The original hoses have "Terramite" on them, so if you see that label, plan on replacing those hoses...

Thanks for all the support guys! A few fun factoids from my project - The FEL fork lift capacity using over the bucket forks similar to the Craigslist picture above, on my T6d 4wd and plywood under the front tires to keep from sinking into the mud, is about 1600 lbs to lift the back tires off...

T6 extension handle for the foot pedal, reduces foot stress and allows machine to moved while seat is the backhoe position. Counterweight needed to control constant drag on reverse gear, combined to create a pedal extension to reduce foot fatique.