Search results

These are nice 4wd tractors, with a FEL and creeper gear , they are very versatile. How much did you pay for it? How many hours on it? How did the clutch repair job go ?

I got some similar hoses but not exactly matching, at the local auto parts store. The only issue was that the lower hose interfered with the fan belt so I made an arrangement with band clamps to hold it back and a small sheet of copper to protect it should the hold back fail or loosen.

@CJFONNER , glad to help . The seal company 'Hercules' has a a very easy to use website for finding and ordering seals. If I had more time , I would have measured my seals and just ordered them individually, but its more work and time. I don't see why, if you measure carefully and look...

I used these two kits for the 7309 bucket tilt and lift cylinders on our 2120 . I didn't measure the bore carefully enough on one kit and had to exchange it for the correct one. There are several options for cylinders and seal kits on a 7309: https://www.ebay.com/itm/143422671112...

Thank you, that’s a great suggestion, I’ll remove the hoses and go see what I can match up at the parts store . Hopefully I can find something close to the needed shape.

Has anyone used those flexible radiator hoses when the perfect oem shape hose isnt available ? Do they work ok ?.

My NH 2120 (mfg date 2000) has shredded nylon on the outside of the radiator coolant hoses, this is a disaster waiting to happen. I looked on the dealer site for the parts and they are discontinued. However it almost looks like the hoses from the 1920 will fit , but Im not sure , does anyone...

I recently rebuilt the front end loader cylinders on NH 2120 with FEL 7309. The cylinder kits from the NH dealer are $175 for the bucket cyl and $299 for the lift cyl. When I spoke to the fella on the parts 'hotline' and mentioned that this was taking advantage of their customers, he assured...

That color coding makes sense, so I got the wrong part. Thanks for the info.

Could you explain why there are four colors, I noticed that in the parts catalog and just figured they were variations by different vendors or grades. Are these spiral bands the only sealing rubber parts in these couplers ? no O-rings ? Thanks.

Hi , We are doing maintenance on a NH 2120 compact tractor with a NH 7309 front end loader. There are a bunch of hydraulic hose quick couplers and most are leaking. I looked at the videos about removing/replacing the internal O-ring on the one side to stop the leaking. Then looked up the...

We used a screwdriver and pried the driveshaft away from the front axle. Once off , it was clear that indeed it was the coupler that had gone bad , all the splines were chewed off from one side. A new coupler part is on order for $130. Thankfully the root cause was something simple and fairly...

We operated without the 4wd since it started making noise and have managed. Today, we finally got around to opening up the fwd lower gearbox on the 2120. I drained the oil and removed the gearbox and had a close look at the gears and the spline shaft that sticks out of the gearbox and couples...

For reference here is another company that sells a lot of parts for the many varieties of these bosch Zexel PFR pumps. Unfortunately this company is in UK but if you can get around that, heck they even sell those darn 5 sided bolts: Injectionpumps UK...

Great, I was worried about you doing it on the machine , outside in the weather, if something drops etc. There are a bunch of videos on YouTube and almost everyone takes the whole pump out and works inside on the clean, flat work surface. Glad you were successful.

Also, for your diesel pump O-rings and sealing washers etc, the folks at “RPM Diesel” in Florida are quite helpful . They have lots of parts and sell them at reasonable, fair prices. https://www.rpmdiesel.com/

If you get the pentagon socket and have clearance to remove the bolts, then the outer pump case doesn’t have to be removed to replace O-rings. I removed the whole pump so as to do it without the penta socket. The penta socket on Amazon has user comments that say this will work on Zexel/bosch...

Thanks , that sounds good. I had a look at the parts diagram and I’d guess that I’m going to find an issue in that small gear case that hangs off the lower side of the transmission case where the front driveshaft attaches. Probably there is a stripped gear or spline or broken woodruff key...

Hi , Recently Ford NH 2120 (mfg 1990) started this chattering noise whenever it’s put into 4wd . The noise seems to be coming from the front of the front transmission where the driveshaft to the front axle goes in. At this point I’m clueless as to the cause but imagine it some sort of...

The socket and new tamperproof bolts are available at this UK supplier, shipping is minimal. “Bosch/Zexel PFR pentagonal socket wrench £47.17 This is the socket for the removal and refitting of the five sided head screws on Bosch / Zexel PFR flange bolts The distance across the screw head is...

Hi I had to replace the alternator on a NH LS190 skid steer. I am installing the new unit but am not sure how to slacken off the serpentine belt tensioner. It does not have a hole for a 1/2 breaker bar which I am told is the standard procedure to grab and pull up on the arm. Instead, on the...

Thanks Rick. We wrestled with it and got the machine dragged out and the boom raisesd. it fought is the whole way, despite unlocking the hydraulic pedals we still had to remove the cylinder ends from the boom arms. Would閾ｴe been easier if quick connect on bucket allowed us to remove the...

Hesston 5530 Round Baler Nice little round baler requires 30 hp tractor. Excellent condition , all belts and bearings in good shape . Makes a 39" wide x 54" diameter bale. Manual string tie. $4000

Hesston 5530 Round Baler Nice little round baler requires 30 hp tractor. Excellent condition , all belts and bearings in good shape . Makes a 39" wide x 54" diameter bale. Manual string tie. $4000

A corn binder ? Fascinating, thanks. And some cultivating parts in the heap. I found a picture of another corn binder and they match up. Do people rebuild these , search for parts ? Is there any point to advertise this machine or should I just send it to the scrap metal yard?

Hi Sorry if this is posted to wrong forum. Can anyone identify what this piece of farm equipment is? Thanks !

Hi I have a ls-190 with a no-start condition. The small wire to solenoid gives 12 volts when the key is turned but the solenoid doesn稚 click and starter doesn稚 turn. Tried whacking with a hammer said starter and solenoid but doesn稚 help. Next move is to jumper the solenoid with a...

Modern diesel injection pumps do get very complicated and require lots of precision tools for testing/calibration/repair (see source below) but replacing leaking O-rings on these old style PFR style pumps is pretty simple. The most difficult part is removing the tamper-proof bolts. So, here...

Once I knew what to look for ,i found the mentioned tool and got the ujoint apart and the yoke off.

Re-sealing your leaking in-line Zexel / Bosch PFR diesel injection pump Is your diesel engine leaking fuel from the block mounted æ’¤FR style Bosch/Zexel injection pump ? The problem is that the rubber o-rings have gotten old and brittle and no longer provide a seal. Fuel leaks around the...

Hi I could use some help here with a repair on a New Idea 5209 mower conditioner that had its roller u-joints broken. One ujoint is still on the splined shaft and needs to either be pushed on further or removed so that the pair can be installed. The problem is that I can稚 get a puller on it...