Search results

I've actually been looking at the Titan forks but curious if they will attach without modify anything.

I need to purchase a set of forks for my 2010 CT445 and I'm looking for recommendations. will any quick tach forks fit without modification or do I need to stay with Bob-tach? any help and manufacture recommendations would be appreciated, thanks. Dave

Found the clutch housing drain plug, approximately 6" in front of the plug the manual shows to be the drain plug. Takes a 9/16" wrench and is right behind the cross member. The manual is definitely a miss print.

I'll have to look for the clutch housing drain tomorrow.

Apparently there is a number of mis prints. Even though the plug I'm referring to is painted orange it is not shown as a drain plug for the hydraulics. It's supposed to hold 13.7 gallons and I only drained out about 12-12.5 gallons, obviously that plug likely would have drained the remaining oil.

Harry in ky, so it's a miss print in the manual? The manual shows a picture with an arrow clearly pointing to the large drain plug in the middle directly under your feet if sitting in the seat.

I'm hoping someone can help me with a little confusion regarding the clutch housing drain. I have a 2010 CT445 SST tractor and today was the first time since I've had the tractor that I needed to do a 400 hr maintenance. I looked in the maintenance book for the drain plug locations for the...

I have a 2010 CT445 SST that is due to have the hydraulic fluid changed. My question is has any one used Mobil Delvac tractor hydraulic fluid. I had a little sticker shock when I saw the price of the OEM oil. I'm not trying to cheap out but wondering if I really need to use Bobcat oil, any help...

Thanks kboxx, I was able to get a copy of the electrical schematic and also the service and repair manual from a guy that used to work for Bobcat. After I looked at the schematic I realized the relays were in different positions then what the manual showed. Once I was able to find the correct...

I pulled the solenoid out and the tractor starts and runs so I'm assuming that definitely narrows it to an electrical issue. I've tested the relay and ohmed the solenoid and all appear to be fine. my understanding of the 3 wire solenoid is the center wire is ground one wire is 12 volts with key...

hello guys, looking for a little help with my 2010 CT445 SST. this started as an intermittent issue but now it will not start. The engine cranks fine but will not start. I lean toward an electrical issue because when it does start it fires immediately and runs perfect. all safety switches are...

Looking for a little guidance regarding a snow blower. I have a CT445 with a shuttle shift, according to the specs, PTO HP is 36.5. I have an opportunity to buy a Buhler Farm King 740 snow blower the owner thinks is 6 years old. his manual says the HP rating of the blower is 35-65 HP. I have...

hoping someone can give me some advise on this. I have a 2010 CT445 that I bought recently and I was greasing the machine yesterday for the first time since I purchased it. There is grease fittings on the front axle pivots that I greased and my question is. Are there seals at the top and bottom...

I recently bought a CT445 with the 2.2L Daedong diesel engine with 870 hours, It's due to have the valves adjusted and am looking for the specs. my manual has no specs and says to take it to the dealer and would rather take care of it myself. hoping someone would have the specs to share with me...