Search results

Yes i have no compression leak thru the valves i had the injectors checked they pop off at 1600 well within specs glow plugs get red after 20 to 30 seconds i did put new pistons and rings in i cant seem to find a timing mark to line up pistons at top dead center for valve adjustment so i watch...

Yes no leakage in intake or exhaust port when head was off had valves done anyway valves set at .014

Yes they get red after about 25 to 30 seconds

It has good spray i tried to tow start it but the tractor is not heavy enough to keep the tires from sliding it will not turn the engine but the starter turns it good no drag any advice.

Ibput rings pistons and bearings to fix a no compression problem the cylinder head was reworked it has compression you cannot hold finger over glowplug hole it blows it off it has 100 percent better compression i bought it couple years ago it quit running on the man i bought it from i tried to...

Chris do you know why i get black smoke out of my ke70 but will not run can you help

Its stamped on the frams with the seriel number about where the hood stops while closed its there on mine on the driver side or left side sitting in the sest

I checked it it is good the injectors are working i have black smoke when it turns over i put new pistons and rings in it to fix the compression problem now it has good compressionbut still will not run any help please

Looking for any info about the injection pump like disassembly smoke set i dont think its getting enough fuel pressure how would you check this any info would be great

Any one know where i can get a set of bearings for a ke70 engine

Hello I have been trying to find a set of injectors for my iseki tx1300f ke70 engine with not very much luck at that.Does anyone know of a place where I can get these injectors or can these be rebuilt mine are not adamimizing the fuel it just dumps it in I need this little tractor so I can...

Hello all I am looking for a repair manual for the ke70 engine It tries to start it put out smoke from the exhaust it gets heat from glowplugs fuel from injectors and air any one know what might cause this not to run I bought it this way so info above is all I have help

Hello all My name is James I worked in the tractor repair mostly on kubota tractors from assembly to complete engine transmission pto assembly Hope to be of help to some of you. I recently bought iseki tx1300f and looking for a service manual for it it has the ke70 engine I need the manual this...