Search results

Results 1 to 11 of 11
  1. S

    Is black smoke a problem while snowblowing

    No snow ingestion.
  2. S

    Is black smoke a problem while snowblowing

    No visible sign of RPM dropping.
  3. S

    Is black smoke a problem while snowblowing

    I have a Kubota B26 TLB that blow black smoke if I push it too much, is that bad for the engine? During normal snowblowing operation everything works fine but If I go a little too fast I can hear the engine tone change slightly, RPM are not dropping, and the black smoke starts to comes out...
  4. S

    Mini trucks

    Suzuki carry DA63T 2003.With efi and a timing chain.
  5. S

    Mini trucks

    I bought my mini 3 years ago and its the most useful piece of equipment I own after the B26. I can carry logs, gravel and a mountain of branches. I carry 2000 lbs of water in that thing with no problems. No more dumping half the bucket of dirt on the ground. Got a closed cab with heat and AC. If...
  6. S

    Single action cylinder rust prevention

    Hi guys, I am building a dump bed for a pick-up with a power up gravity down system and I am using a regular cylinder. I will be installing a breather with a filter on the top port but was wondering if I can pour some oil in there to protect against corrosion. I want to pour in a small quantity...
  7. S

    Power Beyond or another option? Adding thumb, grapple hydraulic lines Kubota B26TLB

    Here are the pictures. You can see how i plumbed from the rear. Picture of the hose clamp before hose go in loader frame, there is another hose clamp under the tractor. Picture of the metal plate that hold the hose under the loader arm, there are two of these. And finally picture of the quick...
  8. S

    Why do I keep breaking shear bolts on my snowblower.......

    Hi guys, since day 1 I always felt my snowblower kept breaking shear bolts for no good reasons. Its a pronovost P-620 which is considered almost commercial grade installed on my B26 TLB. I buy my shear bolts from the dealer so I should have the right stuff. The shear bolt break when I am in the...
  9. S

    Kubota B26 loader joystick problem

    Hi everybody, lately my kubota 2016 B26(200hours) loader isnt performing as it used to. From the point I started to notice an issue to right now it took about 3-4 hours of loader work. At first the loader seemed to be slower than usual, I could get acceptable speed by reving up the throttle. I...
  10. S

    Third function DIY

    Hi guys, I plan to build a third function for a log clamp from cotech on my B26:Cotech I will use one of the rear remote to power it. My plan is to remove the two hoses on the rear remote between the tractor and the quick connect. Bring them to a hydraulic shop and have them put a "T" on...
  11. S

    Skidding winches

    I am a very proud owner of a brand new Kubota B26 TLB and I am looking to buy a skidding winch to do some land clearing. I recently bought 15 acre of land next to a river and want to do some selection cutting and get rid of the pines and poplar that have grown up, the trees are around 12-18 inch...
Top