Search results

Thank you for that. I have a LA352 so slightly different but that's where it's at.

Could anyone tell me where the hydraulic relief valve is located on a B7610? I expected it to be on the right side near the power beyond but I'm not seeing it. Actually I looked under it on both sides and nothing is jumping out at me. Any help is appreciated.

This is the top cover flipped over. I don't see anything loose, broke, missing, etc. The hex head plug looks backed out, but i'm not sure if it is or not. It seems snug but could be jammed, IDK. Any ideas??

Like the title says, I've got a hitch problem. It will go up but not down. I was having an problem with the hitch not going down when I noticed the lever roll pin was coming out. I pushed it back in but it still nothing. It seems like the neutral/center is where the down position was. I pulled...

After giving it the once over I found one of the steel rivets that held the Data tag, the other rivet has apparently rusted flush with the deck. It looks like it was mounted beside the gearbox and could have been read by standing to the left of the bush hog and facing the gearbox.

So I bought a Bush hog the other day that's been sitting forever. One of the things I need to replace is the PTO shield. After a bit of research it seems it came with a #4 Binacchi driveline, Bush hog part #90012BH for the shield assembly. Problem is, it's about $90. Will any generic #4 shield...

I just picked up a 5ft Bush hog brand bush hog. After hosing off 1/2 a foot of leaves where it had been sitting forever I found the data plate. It was just sitting there on the deck under all that mess, anyway any idea where it was originally attached? or what year a model SQ60R-4 would have...

Thought I might revive an old thread. This was one of those wife told me not to so I had to things. I was cutting down a bank beside the driveway so it could be landscaped instead of using blocks or RR ties when my box blade snagged and ......

It wasn't my first choice, but the price was right. I think it will make a good project for this summer. The pin fits are in good shape, but the hydraulics will need to be rebuilt/replaced. It says Davis on the data plate so i'm guessing it's pretty old. Does anyone know how to date something...

At some point I'd like to add a backhoe to my tractor ( how I found this site) either built or bought. My tractor only has 4.4 gpm, so probably not enough to run a backhoe, external pump will most likely be a necessity. I've seen rear pto pumps and they would probably be fine, but I was thinking...

One of the things I'd like to do to my tractor is expand the hydraulics. Adding a third function valve seems like a popular choice, so I'll probably start there. I'd like to add a spool valve beside my loader valve. I think I found a way to do that if it will work. Can someone with some...

I found BFreaky's backhoe build while dreaming of my own backhoe build and decided to hangout for awhile, tons of good stuff here. A bit about me. I was a manual Machinist after High school and for several years in the Army. I changed over to an Electronics mechanic repairing electronics on...