Search results

Great so Far. I put a Summit-Hydraulics Hydraulic Multiplier Valve, SCV Splitter / Diverter with Couplers and Push Button Switch on it to have like 2 remotes on the rear to operate a Hydraulic Top Bar and Side Bar. It works great although I don't have the hydraulic side bar yet, they were out...

You're welcome @isleview. For everybody's information I purchased an HD Dethatcher from Good Works Tractors and man I love that thing for maintaining gravel driveways, lots, and preparing ground for seed. You wouldn't think by looking at it that it would do so well but it does an excellent job.

There you go. It was pretty simple.

Thanks Summit for emailing me the exact steps which reassured I was doing the correct install of the Petcock. It was easy. Just use a 19mm wrench, unscrew the input line Banjo bolt, replace with the part from Summit with washers in the same place, tighten, done.

Thank you Summit, I received the Fuel Shut Petcock today. Now can anyone tell me where this screws in/mounts in the line?? Appears in the Summit Mitsubishi Engine service manual that there should be a Sediment bowl type fuel filter on this tractor that this might screw into but I don't see one???

The Dealer was setup as a Summit service dealer within a matter of hours. I now have a service dealer within 10 miles!! Good job Summit and Noah.

Do you have a suggestion or work with anyone for Tractor Insurance?

Any updates on the Petcock fuel valve?

Where are these accessories? It's August 2024 and we need the Grill guard, etc and are anxious. :)

Wow, you have some experience now, I just bought mine 8/4/24, loving it. Got the BPX60 Box Plane and the GX54 SSQA 54" Grapple. Don't have much time on them yet but at first sight I'm impressed with the power of the tractor (once I figured out I didn't have it in 4x4). :D

I just bought my new Summit Tractor 8/4/24 and had App issues so I just called them today at the 770-209-3390. Talked to Noah and it was easy and he was very helpful with other questions that i had. He actually immediately called a Tractor dealer close to me that sells and services a sister...

Got my new T 4.75 in and on the invoice it's listed as having under Mid-mount valves.....mid-mount w/mec Joystick + div?? Ok so I understand the hyd set of connections on the loader is hooked to the mid valve and the button on the joystick when held down diverts the fluid to those connections...

Awe man...?.I can't stand it...? I had to blow off steam of glory to you guys because my new Powerstar T4.75 came in to the dealer today. I can't wait, I'm 61 yrs old and feel like a kid with his first car. Brings back memories when 13 yrs ago I got my TC55DA. I sure hope this a/c makes this...

Thinking of a new tractor, mostly for wanting a cab. I've been extremely happy with my TC55DA EHSS that I bought new in 2005. Can't get that size blue tractor with a cab so it's way down to the utility size (which after having this 55hp I'm afraid I'd be unhappy) all the way up to a low end...

My TC55DA has just over 500 hrs and i've just completed doing all the major fluid changing in the Trans, Hydraulic, Rear End.....and the Front axle and Final Gear Reduction in each front axles. I noticed in the manuel it recommends changing the Power Steering Fluid. I must be stupid but i've...

I purchase a Rhino TW-60 brush hog about 2 1/2 yrs ago and I went to check the gear oil this season for the first time and noticed it looks like it's milky and has accumulated water or moisture in it. I figure I should drain it and fill it back up so I see 2 plugs on the top of the gear...

Thought I'd share my experience yesterday. I was doing some pretty heavy front end loader work and was carrying a load of dirt when......*%$#@ SNAP, BOOM, DROP.........My left front just fell to the ground!!! Scared the dog, you know what, outta me! I thought the dang front axle broke...

tnak, Been researching myself for a long time and decided on Bad Boy for me and my 72 yr old mother. Now you have me concerned. I'm suggesting to her the ZT26 as you bought. I'm in a pickle now......I talked her into it and she's tighter than "bark on a tree". I sure don't want to get her...

I'm looking to buy a new ZT mower soon. I have a total of 27 acres of brush with approximately 5 acres cleared so far to start mowing this coming season. Eventually I'll have more cleared. I have a tractor and brush hog for the roughest stuff but this is pretty rocky, rough ground to cover...

Well gentlemen, I've looked and read posts and specs for sometime now and would like to run some things by you all. 1. My wants and needs are for a 2 seater (4 or more occupant) machine. I've physically look at JD and really like them. I like the looks, the quality, the "kick the tires" of...

Ok, I'm sure i'm not the only one having the delima on 0-turn mower decision. Here's what i've discovered so far: 1. The box stores sell several brands all around $3,000...... 2. My "gut" only from my limited experience tells me I don't like Briggs engines or at least prefer something...

I hope it's ok to talk about this subject but I'm having a delima and didn't know who else to ask. You folks on here have always come through for me and you're all real smart! I'm about to finish my farm/lake 2nd home and need high-speed internet and satellite TV there. I'll be spending most...

I'm clearing several acres of brush and I go thru dulling chains real often. I have a guy who's been sharpening my chains but if I could find a good machine i'd buy one and do it myself. Where can I find a good deal on one??? What's the easiest to use and best one to buy??? Thanks

I have a Snapper 1855 that's about 30 yrs old.....it was made by Massey Ferguson then Snapper took these tractors over somehow. It's still going but the issue is the deck pulleys and belts. The deck has 3 blades operated by a rubber insert gear cogged pulley....a cogged belt (what i'd call a...

I just purchased a new Woods BH80-X for my New Holland TC55DA tractor and it stinks!!! The first 10 seconds of digging I could tell it was just "giving up" on power. Sure it will dig sand or soft ground but let a 1/2" root get in the way and it just stops. It was equipped on the dealers lot...

Well bummer.....My 6 month old, 150 hr, TC55DA just pooped out on me this weekend. With no warning at all the clutch return spring broke leaving my clutch pedal hanging down. After investigating further, looks like the clutch cable is extended out and won't retract either. The clutch is...

Gentlemen, I'm new to this forum and I am totally addicted to it after spending hours of reading posts. I'm in the market for a new tractor. I have an old early 70's Ford 3,000 that my dad bought when i was a kid. I grew up on that tractor and the dang thing just keeps going and going. A...