Search results

I have used Pat's Easy Change for years on my smaller Kubota L3010 and love it. I now have an M4 with extendable lower 3 pt arms. It is Cat 2 hitch. I also now have a cab which makes hook ups not so easy (I used to have access to the HST pedal from the ground before....I know...not safe). I use...

I have a L3010. It is starting fine, but the glow plug light comes on and stays on after starting. Is their both a Relay and a Controller? What is a Timer? Does anyone have the part numbers for these? I am not finding both relay and controller at Messicks, just a relay. However on eBay there is...

I am looking at a tractor with a front pto/3 pt mount. I have a 5 foot flail that I currently run on the back of my tractor. Is there a difference between a flail that would mounted on the front of the tractor and move forward? What would happen if I used that flail facing forward?

I am looking for a Narrow Kubota for narrow aisles at berry farm. Looking at M6040 or older models. Don't need a lot of HP, but 48" width a necessity. What is the best choice of older used models or a good price to start negotiating on a new M6040? I don't need a cab as we are Organic and I...

My key no longer turns off my L3010. I must use manual shut off. I checked "keystop" fuse and replaced with new. It was fine. I bought and replaced the Denso Stop Solenoid, still same problem. Now I have an extra solenoid if anyone needs one. What do I try next?

I have a Grand L3010 HST that is rated at 7GPM hydraulic flow. I am looking at purchasing a mulch spreader for blueberry rows that requires 10gpm but the manufacturer says it will work fine on 7GPM. The hydraulic flow moves the floor that moves material towards the exit. I have rented similar...

I am changing the tires and rims on my L3010 and I don't have a jack appropriate to lift rear to do that. What would it take to lift the rear to change tires?

I currently have a Kubota Grand L 30 and we now have 40 acres that we need to do heavier soil work and hay bailing. I don't need a cab, and I am looking for advice on what to buy in that hp range and if it is enough hp to plow, disc, till and hay 20-30 acre areas. We hire work out now to a 200hp...

I need to bid a large job (it is on my own farm but contracting to someone who is leasing). I have a 30hp tractor, a five foot bushhog and a five foot disc set. I normally charge by the hour when working elsewhere, but this bid needs to be per acre. I will be mowing level ground twice a...

I need a subsoiler for my Kubota L3010. Am I restricted to a single shank ripper or can I step up to a three shank?

Where can I get a decent seat for my Grand L 3010 that has come apart. I park outside. I found the original comfortable, but did not hold up. I would love to spend under $100

Where can I get a new seat for my Grand L 3010 Kubota. Something nice. My original has come apart. Do I have to replace the entire assembly or just the seat?

I have been doing field mowing and one of the home owner associations requires persons working on site to have $1 million liability insurance. Any idea what that costs and if I can buy it for a job at a time?

What is the hook that holds clutch down used for? I use the rear hydraulics for a log splitter with the tractor out of gear. Will holding clutch down give me more hydro power? What else would it be for? Thanks, h-bob

A few years ago I downloaded the complete parts list for my L3010 but have since lost that file. I don't remember the website that gave out the parts list but I hope someone else has the file or can direct me to it. thanks much, harleybob

I need a few things for my Kubota L3010. I don't live close to a dealer. What is the best price source on the web for Kubota parts (beyond filters)? Thanks.

Anyone have experience with the Muratori (Italian) tillers? The brand has been around but not many turn up on a search of this forum. I purchased a chain drive/slip clutch 60" new on eBay (about $500 less than anything else I could buy new). I have been plowing and discing for years but I have...

I am looking for a disc harrow for my Kubota L3010 3pt. What would my weight limits be? I want as heavy as I can lift.

I have 28 acres of old potato furrows that I need to level out. Now grassed over for about 5 years. I am using a Kubota L3010. I need to level out the old furrows and prepare for forage/hay planting. What is the best tool for that? I currently have only a box scrapper. Would I use...

What does it take to convert standard bucket on my L3010 with loader L481 to quick connections for using Skid Steer implements?

I am looking at adding some pallet forks to a Kubota Loader for temporary use when moving feed pallets around the barn. Anyone out there with good feedback on the bolt on or chain on pallet forks and which ones to get? My max load is 1100 pounds/pallet. I would get the cool system that you pick...

What is the best way to put in V ditch for drainage? Looking for about 18" deep and 18-24" wide at top.

What is used to install V ditch drainage? I am looking for something that digs about 18 inches deep and about 18-24 inches wide at top of V ditch.

I added a hydraulic log splitter to my Kubota L3010. The splitter attaches to rear hydraulics and has a pair of 54" hoses and the ram cylinder is 4" diameter. I have been running the splitter for a few hours and have added about 1.5 gallons of fluid to the system and I am still a bit low. I am...

I have a Kubota rear hydraulic valve (this problem mentioned in previous post) that kicks out of detent when running a log splitter. My dealer solution is the standard answer... use a bungee to hold the valve on to deliver constant flow to log splitter, which has its own operation valve. I have...

I have a log splitter (which has its own Prince Logsplitter Valve) that runs off my rear hydraulics that has a detent in one direction for continuous flow. However the lever pops out of detent when using the splitter. If I block or bungee the lever in place everything works fine. Is there a...

I have a Kubota L3010 with the Kubota rear hydraulic valve (#1) that I am running a log splitter from that has its own Prince LS3000 log splitter valve. I ran the thing when I first set it up or a few minutes and my Kubota valve stayed in the detent position fine and I could run the splitter...

I just purchased an 18 foot flatbed trailer for my Kubota L3010. What is the proper way to bind the tractor to the trailer? Chains or wide (4") auto straps? I have some load binding devices for chain. I need to add welded D Rings at the correct points for connecting chains. Where is it best to...

I am going to purchase an 18' dual axle (w?brakes) trailer for my Kubota L3010. I have a choice of tilt trailer or ramp trailer. Tilt is $400 more and a little more weight. So tilt or not tilt. On issue for me is can I load tractor when trailer is discunnected from truck and if so, is one type...

I have read MadReferee's explaination of how to run the power beyond valve for adding simple hydraulics off FEL (in my case for running log splitter on a Kubota L3010). However I want to get the correct valve. I understand it should be single spool, open center but there areother options to...

I have a L3010 with loader and want to add a connection to run a 3pt log splitter. I am not looking for full rear controls at this time. How do I add a block to allow supplemental hydraulics. It appears that the front loader occupies all the connecitons that came with the tractor.

I purchased new Bush Hog blades for my SQ600 Bushhog rotary mower. I have removed the blade bolt nuts and lock washer from above but cannot figure out how to get the bolts out of the blade hodler assembly. Is the blade bolt driven out from above? They seem pretty set in their ways. Is the bolt...

I need to replace a few parts on my L3010 and am looking for some good online parts sources. Price and easy shopping are of concerns. I have no convenient local dealer.

I have a L3010 with HST A second problem related to clicking mentioned in another post below. When my engine is running and PTO is not engaged, the PTO shaft spins. When I have engine off, and turn PTO by hand, there is a clicking noise.

I have a Kubota L3010 with HST. I was brush clearing in the woods and my transmission/pto started making a clicking noise. I also notice that the pto spins, when not engaged. If I turn off tractor and turn pto by hand, it makes the clicking noise. I did have some brush hung up under the tractor...

What would I need to do to add a back up alarm to my L3010? One that I could disable when I did not need, and one I could use when I am around people.

Ok, so I banged the filter off with a punch and hammer. The manual for the L3010 HST says turn the Hydro-Transmission filter 1 turn after contact. There are markings on the side of the filter to help you guage 1 turn. I can only turn it 1/4 to 1/2 with a major long handle filter wrench. It is...

Following up on ealier stuck filter post... Does Kubota make a proprietary spanner wrench for the hydro filter? It needs one. The base of that filter, on HST models, has notches for such a wrench. I had a heck of a time changing the filter without it and I don't believe I have it on tight enough...

I am doing the first Hydro change on my L3010 HST and the transmission filter (left side) will not come off. The Hydro filter (right side) came off fine. I broke one filter wrench and bought a $40.00 super wrench that turned it maybe 1/4 turn and no more. Any tips on how to get this off. In the...

Where is the best, reliable, least expensive place to order Kubota parts online. I am thinking filters, and that air cleaner sensor I mentioned on the Kubota Owning/Operating forum.

When I take out the air filters, verifying they are indeed clean and the breather is not stuck, and push them back in firmly, the light will usually go back off. As long as the motor runs correctly and not getting hot etc, I assume I can run with the indicator light "on" with no worries, until I...

I need a trailer for a Kubota L3010 (#3000) and am confused as to beavertail, tilt loads etc. Do I want a beavertail. I want to be able to load and unload when NOT attached to truck so, do I require a tilt, or just front and back jacks? I know I don't want tilt ramps in back, so I can carry by...

I am having the usual L3010 air sensor light on problem that others seem to have. Filter is clean. I have heard the sensor sticks and needs to be shook. Is the sensor at the base of the inner filter,with two wires coming out of it. (Right side of air filter housing, when looking forward?) Is it...

I have a vintage IH Cub that I have added Lead Substitute to fuel for past 12 years. The mechanic who works on my tractor (who has owned and operated Cubs for decades) says to add kerosene to the fuel instead. He figures that is what the expensive additive is anyway. Anyone have thoughts on this?

I have a vintage Cub that I have used Lead Substitute in unleaded gas for the past 12 years. I just had engine rebuilt and the mechanic, who owns and has operated Cubs for decades, says to add Kerosene instead of lead substitute to gas. Anyone else have experience with that?

I am looking for a PTO Chipper for my Kubota L3010 (30hp). What is out there. I will not be doing commercial chipping, just around the farm. Should I get one for the PTO or one with its own motor and tow it around with the tractor? <P ID="edit"><FONT SIZE=-1>Edited by HarleyBob on 11/28/01...

"Don\'t change Hydro oil at 50 hrs" says Dealer I have a L3010 HST that is at 50 hours and I went in to the dealer to get everything I need for the first 50 hour service and the mechanics and parts desk told me not to change the Hydro fluid at the first 50 hours unless I suspected it was...

I am going to rent a B21 with backhoe to move some trees on my property.(I have a L3010 with no backhoe and find it cheaper to rent one when needed). What is the best way to dig up small to medium size trees, lets say up to 6 or 8 inch diameter? What is the technique to use to best insure that...

I am having a tough time matching the average price folks are getting for a L3010 HST with loader and R4 tires. It seems people are paying around 17,500 + tax. Any help I can get negotiating would be appreciated. I am also interested in a Land Pride 25 series rotary cutter and a 3 pt finish...