Search results

I need a speed sensor for my early gen toolcat. There are backordered from Bobcat and AGA Truck parts claim they can one in about a month. Has anyone dealt with them before?

A friend of mine has a '18 toolcat with an older 72" SB200 snowblower on it. When it's hooked up, auger works but chute won't rotate nor will the hydraulic cylinder operate. I began by checking for 12v at the machine 7pin, which there was. The bobcat CAN bus will send a signal to the control...

Friends, Had a 50-56 error which lead me to finding a solution here - a solenoid on the steering and cargo box block is bad (almost shorting to zero) causing a fuse to blow, causing the error. My question is, how do you remove the solenoid? The nut is loose but it just spins. The top (or...

Has anyone found a replacement for the 1st gen speed sensors? I looked at my front axle one and there is wear on the face. I'm also getting error codes showing both sensors aren't being read. I've tried cleaning connectors but it hasn't made a difference. Bobcat was $500 for the sensors and...

I recently had an issue with my toolcat where it would gurgle after shutting it down. I was loosing a very small amount of coolant over time so I pulled the head and took it to a good engine shop. He checked the head for cracks, cleaned it up and returned it. I replaced all gaskets, put in a...

I have a lead on a shop producing replacement rocker panels for the toolcat. I know mine are rusting out bad. Is anyone else interested? Cost looks to be around $300 for one side.

Does anyone have a wiring diagram for a T300? I'm getting a low voltage on the 8v circuit and need to check the controller. I don't get 8 volts on any pins, only 12 on a few.

I almost have this thing back together and running; well, it runs but what am I doing wrong here? That return line can't be installed any other way and it's hitting the glowplug. Please help. Rest of the story to follow. 216817_165934.jpg - Google Drive

I'm thinking of selling my S175 and going to a toolcat (private owner, 20 acre hobby farm in the country). The TC in question has 2900 hours and is an A series. With the drive motor issues they had in the past, I would think at 2900 hours those issues would have already been addressed. Any...

Has anyone used a quick attach backhoe made for a skidsteer on the front of their tractor's FEL? Any thoughts on if this would be easier on the tractor rather than using a 3 point mount?

I currently have a 29hp w/ HST and I do a good amount of snow removal, loader work. I also do grading, etc - general hobby farm work with the tractor. I have an opportunity to upgrade to a 60hp unit but it's a power shuttle instead of a HST. Huge upgrade in power of the tractor, question is...

Is anyone else having problems with their TYM starting? I have a T293 with ~150 hours on it. When it dropped in the single digits here, the tractor will not start. I have it stored in an unheated barn. I'm using dyed fuel with addtive to prevent gelling - besides single digits aren't...

Here is my T293 with a converted 3 point snow blower to QA. The blower is an older farm king with a 23hp Briggs and Stratton Vanguard. The advantage to this vs PTO driven is ease of removal. If I want to put the bucket back on to move snow around, same QA procedure. The downside is this...

So far I've put about 95 hours on the 293, I've been happy with it so far... The other day it helped me sister a broken support on the barn 16' 2x8, notice that the quick attach levers are both in their down position: The next time I went to use the tractor I noticed I couldn't engage the...

The new TYM website is up, it looks good. I watched the T293 video and would love to offer my services to assist in translating! :laughing:

There I was, moving some equipment around in the barn making room for the new-to-me T293. After finishing up organizing I decided to make a quick pass on the drive to scrape up some of the melting mat. On my way back to the barn I got that pit in your stomach feeling. Something bad just...

I may end up in a situation where either 1) I purchase a tractor from one dealer farther away because of price (~$6k difference) 2) Purchase a slightly used tractor (34 hours). There is a TYM dealer near me but we are too far apart on price, is warranty work up to their discretion?

Maybe this will save someone some time, this is what I found:

I'm looking at a 2013 T293 with loader for $13k, new. Any thoughts?

I can pick up a new 2013 T293 with loader for $13000. Doesn't have the mid PTO option...any thoughts?

There I was stopping in to look at some equipment, a zero turn mower and browse the TYM tractors at Maple-Lawn Equipment in Wisconsin. After chatting and browsing for about 45 min. it was time to get back on the road and finish our trip. I started the truck and, long story short, the vacuum...

Background: I had a 1 acre lot that was manicured with a GC2300, MMM and FEL. Great machine for what it was, really got me into the tractor / SCUT way of doing things. Present day: We are closing on a 20 acre hobby farm that currently has no animals. The 20 acres is mostly wooded with two big...

Would a 60" front mount snowblower be too much for the GC2300?

All, My tractor history has been a small honda riding mower, Allis Chalmers B10, Simplicity Sunstar and now the GC2300. The MF is amazing, I got it with a FEL and MMM, 26x hours on it. I do have a few questions: 1.) I saw a CD on ebay with the manuals, owners manual, etc. It's $40...is...

I was set on buying a B1700 because I wanted something a little heavier than a BX series and plan on keeping the tractor for a long time. I only have to mow 1 acre but have some jobs that I want a FEL for. Admittedly the B series is overkill but I thought it would be a "forever" tractor. I...

Have an opportunity to pick up a B7000. The owner says when you push in the clutch it won't disengage. He was just using it and supposedly didn't have any issues. I've read about an adjustment cable, just wondering if anyone has any insight if this could be a nightmare? He said he wants...