Search results

This is a 2023 model and don't when it changed but the 2638 no longer has the glow position where you turn your ignition switch to the left. I measured the timing when first turning to ignition (not starting) and glow plug indicator turns off after 35 seconds. Once started, the glow plug...

I've replaced my 2810HST with a new 2638HST and would like to know how others are starting your tractor. The glow plug initiation is different and salesman says a glow plug pre-heat is no longer necessary.

I am looking to trade my Mahindra 2810HST for more horsepower. My 15KW pto generator got me through hurricane Irma just fine even though it specs requiring 32HP. May not have gotten fully loaded but still want that capability. Additionally, considering a tiller which requires 35HP. I don't know...

Can someone please tell me the correct battery replacement for a Mahindra 2810HST? The parts manual and owners manual are not very helpful. Thanks in advance!

My Mahindra 2810HST stops running randomly. When I hit the brake it will continue to run. When I release the brake it may or may not continue to run. Anyone experienced with this issue that might give me some advice would be greatly appreciated.

Anybody know what the TYM equivalent of the 2810HST is? If so, do you know if they are identical or did Mahindra make certain changes or variations? Thanks in advance. Danny

I recently found out that Mahindra had a modification whereby they added a relay mod into the wiring harness in order to eliminate a voltage backfeeding through the control module and burning it out. My machine is two and a half years old and this was my dealers first instance of this but I...

Your suggestions please. The tractor has been cranking fine all weekend but the last time I shut it down and went back to crank it, it just failed to hit the starter. I've jumpered the seat switch and tested the brake switch, pto is off. I hear clicking but no attempt to turnover. It acts...

This may seem like a dumb question but I'm a little new to diesel engines (previous tractor was gas). In another forum, someone mentioned that they use gloves when pumping diesel and I just passed it off as for the fact that diesel stinks but I suspect there's more to it. I often, when nothing...

My manual says to start using the glow plug to start the engine at 23 degrees F but the tractor seems to crank so much better when using it even though it's warm weather. What do you guys do?

In case some of you haven't seen this site (I hope I done that right), I ordered a couple Mahindra caps, a shirt, key ring and coolie. I got two different styles of cap. One is referred to as the ag style, it has mesh panels and the other is solid and low profile. They're better looking than...

I have yet to take the MMM off my 2810HST but I'm deliberating over the possibility of lifting the front wheels with a hoist and hopefully rolling it out from underneath. It seems like this would make it quite a bit easier. Can anyone give their experiences in the matter? Danny

I thinking about adding a backhoe to my 2810. Anybody know if the Mahindra 3265 backhoes can be added when a Mahindra MMM subframe is installed?

I thinking of purchasing a combo sub-soiler/middle buster. link My immdediate need is to bury some cable but it seems this combo unit would be useful. My question is will the middle buster serve as a plow or am I misunderstanding the use of this implement? I would appreciate any input. Danny

Okay, I'm gettin' spring fever and don't have a tiller. The footprint of the 2810HST is around 64" or 66". So who's got what and what are your suggestions? Thanks in advance. Danny

I just noticed that Mahindra states the standard features of the 2810HST as having "Handy tool box in the operator platform (under rubber mat)". If it's on mine, it's well hidden . Does anyone here have this on their machine? Danny

Adjusting Trailer\'s Electric Brakes How do you adjust the electric brakes on a trailer? I've been braking with my trucks brake pedal and adjusting the controller until the trailer tires lock on soft ground. I have since realized that my controller has a manual switch on it that will work...

I've recently had a mmm installed on my 2810HST and would like to hear from anyone else that has one. It looks like it will be a bear to take off and put back on. The shop guy who installed it left off the two bars that go from front to back mounting brackets. I think I see why he didn't put...

Well you guys convinced me that I needed a toothbar so it's on order. Ya'll have done such a good job of helping me spend money and I appreciate it----the wife, not so much so . Anyway, I was just thinking, do you have to do any differently when it comes to removing the FEL? Danny

I've bought a scrapeblade that will slide from side to side and can tilt each end. I'm wondering what steps to take on my driveway which is a slight hill and is washboarded? The blade will also angle and reverse so I assume you would use it reversed as a final step. Should I start by creating...

Anybody know what weight gear oil Mahindra uses at the factory? The manual says to use 80W or 90W but I just want to bring the level up a bit and not take a chance on mixing weights. Danny

My tractors wheel width is a little better than 5 1/2' and so I use a 6' brush hog but was wondering if it's that important with a scrape blade? I have been offered a used 5' blade for $250 but haven't checked it out yet so I don't know if it's a light weight or heavy duty but I think it is...

I understand that these mowers are made by Artsway Mfg. Anyone with any knowledge or experience with their stuff? Danny

I used my FEL for smoothing the driveway once and made it somewhat better but wondered if I should be investing in a boxscrape or with a little more practice, I can do a good job using the FEL? The tractor is at the dealer right now getting a MMM installed so it could be awhile before another...

I been wondering, when using my brush hog, it is better to engage the pto with it up to speed or is it better to engage it at low speed and bring it up to proper speed or does it make much difference? Thanks in advance, Danny

Well, I went to attach my just purchased last year brush hog and can't get the driveline to telescope nor can I figure out how to remove the driveline guard to get at it. Can some of you guys please give this greenhorn a little help? I would be most grateful!

I am considering adding a mid-mount mower/belly mower to my 2810HST. Anyone here with one? If so, cost, how easy to install, and comments would really be appreciated.