Search results

I don't believe my fuel preheater is working. I have about 850 hours on my tractor. I don't feel any warmth at the manifold preheater. I could not find a part number for the preheater. Troubleshooting recommendations are appreciated. The tractor is primarily used to skid logs to my sawmill.

My tractor is a 2003 Farmtrac 60. I've owned it since new. I bought it because I wanted a simple easy to work on tractor. I have about 620 hours on the tractor but they are hard hours clearing land, building roads, digging a pond, and clearing trails in my wood lot. I intend to work it a lot...

Now that TPG helped me get my fuel injection pump working again I can move on to my next puzzle. What size/type of male fitting do I need for a Farmtrac 60 hydraulic remote? I just purchased a Norwood Skid Winch which uses a capstan powered by a hydraulic motor. The hoses are 1/2 inch and the...

Linkage on FT60 felt like they were binding. Tractor would start, idle high then shut off. I lubricated them with WD40. Problem seemed better. Tractor would start up idle and operate normally. Got stuck. Was working through reverse fwd gears and rear lock to try to unstick. Increased...

Attached is a picture of the AVR from my generator. This is the old one which produced about 89/160 at 60hz...was replaced and now the generator output shows on the on board display 109/217 @ 60hz. The second picture is the wiring diagram from the generator which indicates the AVR is...

Free for viewing and printing at my website. Tested and you can download and zoom in with your browser and read all the fine print. The foldout wiring diagram is 4 pages long so if you print you will have to tape together. Apologies for not having this done a long time ago but...stuff happens. Jim

I have a new Farmtrac 60 service manual for sale on ebay Farmtrac 60 Service Manual (131340801303). This one comes with the original plastic wrap...it is a later dealer sold black and white reprint that does not have the color diagrams. I have published color copies of my earlier service...

I need to replace the tie rod end dust boots on my Farmtrac 60. Does anyone know of a suitable replacement? Thanks.

Above is data I've collected on my website. So far it looks like Farmtrac 60's are concentrated on the east coast of the US. It is interesting to see where this escorts model or maybe even old Ford 3620's are located throughout the world.

My tractor has a Long 5320 loader mounted. What other manufacturers make loaders that fit the farmtrac 60? Where can parts be purchased for the Long 5320 loader? Thanks, Jim

The Long 5320 Loader Operator's Mannual is uploaded. Visit Welcome To Red Bay Farm - A Suburban Tree Farm to get your free copy. Click on the Farmtrac 60 button.

Free copy ready for download at Welcome To Red Bay Farm - A Suburban Tree Farm

For Farmtrac 60 owners I have posted a copy of my manual in a .pdf file. Even though not as extensive as a service or parts manual it provides lots of useful information for the Farmtrac 60 owner. I don't know but some of the information may be useful for other Farmtrac models. Just visit my...

New items are in bold. Near 375 hours. Didn't use the tractor as much since my trails are all cut and all I need to do now is mow a couple of times a year, haul firewood. This list is also posted at Farmtrac 60 tractor-parts cross references. Below is my list of things done to repair my...

Like many of you I bought the Farmtrac 60 because it was pretty much a copy of an earlier Ford model. According to the parts manual the Farmtrac 60 is modeled after the Ford 3620 (see page v of the parts manual). I have put together a webpage to collect cross references for replacement parts...

Running any tractor in the woods is prone to cause problems. My Farmtrac 60 has developed a pretty good leak of hydraulic oil from the right side of the differential where the low pressure return enters the housing. I've had some tree limbs get stuck or jammed in that area so I suspect that is...

Below is a link to my website and some pictures of some of my most recent projects which required the use of my 03 Farmtrac 60 with FEL. Projects

The Farmtrac Filters are expensive. Using Ford 3910 I found these filter numbers for the oil and hydraulic. WIX filters: Hydraulic 51712 Oil Filter 51775 Has anyone used aftermarket filters on their Farmtrac 60 or 555? If so, lets develop a cross reference list (if not...

Hi, Here is an update on my 2003 Farmtrac 60. I purchased the tractor new in 2003. I've made periodic posts on how I like the tractor. Tractor has about 225 hours on it today. I still like it. Here is the latest info. As I said before I was missing a grease fitting and I had a...