Search results

What machine? My bobcat I can adjust the flow of the auxiliary port.

No sold it a long time ago.

I dont know. But should. All those era compacts are very close.

I still have a lot of these parts. Tires sold. Have: hydraulic pumps Engine parts rear axle super steer axle

Here they are.

Not the best scan, but might help. Whoever scanned it had the worst scanner. There is a page on the controller connectors that look better.

Add pics.

Came off a NH 1630. All I have is what's in the pictures. Not sure on the model. Thinking $20, but open to offers. From Messicks, it could be the following: New Holland: New Holland (914A-SERIES) - NH MID-MOUNT MOWERS (1/98-12/00) Parts Diagrams Maybe for a 914A mid mount mower

Maybe attached diagram will help you out.

This is from my 550 TLB manual. From your date code, it is from Sept 1975.

Same loader on a 4210. Your 4310 hoses are routed incorrectly.

This was several coats of the bedliner. If you want to paint, get the Eastwood 2 part epoxy primer. $20 a can, but you need a grinder to get it off if you prep right.

Anyone have a private owned dump truck? I am looking to get a rough estimate on insurance cost. I have some equipment that I wanted to move over the years, and thought maybe just but a dump truck and trailer. I would have use for the truck several times a year. I am looking at older 1980's...

I have used these for welding. Magnetic is strong so works great for steel welding. HF has coupons for them at $18.99 a few times a year. I like them because they are rechargeable with a micro USB cable. It bends so you can aim as well. Also works great when wiring electrical panels...

I made one of these for both my tractors. Universal enough to get the job done. If you search for chain storage on here, you will get all sorts of great ideas.

Maybe this will help persuade you. With HF always google the SKU number for a coupon. Just about always out there.

Here is the valve, item #1.

I have a Ford 550 TLB with the European side shift backhoe. I am looking for a hydraulic valve for the slide clamps. Mine was never used and got water in it and seized. I got it freed up, but not in good shape. I tried the Googler, and can't seem to find many yards over there. These side...

Any issues with this?

#24. Might be behind the loader mount if you have one.

Yep!! Doesn't help when you run into 2 abandoned septic tanks.

1925 with 34hp. No loader, but loader valve. About 2k hours. It had a bad rod bearing, so engine was just rebuilt. Runs good, but things seem tight on it since it has been sitting. 4WD hydro. R4 tires. Asking $5k In MI 48170

I have a 1630 with about 4K hrs on it. Has a cracked engine block and transmission housing. The engine ran, but was hard starting, I think it needs the valves done, but block is cracked, so will probably part out. I have a complete front supersteer axle minus the short driveshaft is missing...

I have a used and abused Rockhound I just picked up this year. Someone started working on the hydraulics, and screwed it up. The pulled "regulator" out of the hydraulic valve part number 6632257 or 6632258. If someone has a 5A that maybe they worked on and took pictures of the valve, it would...

Try tightening the locknut first.

From the I & T manual. If you don't have the manual, I suggest you get it. They are a condensed version of the service manual. You can usually get them at Tractor Supply or Farm and Fleet stores. Cheap.

What do you need? Here is the bolt sequence for the head.

Here is a 1710 schematic. Probably close. My 1700 has a fuse box under the steering wheel. Not sure about the 1710, but thought it was similar. 2 fuses seem like not enough for the tractor with lights and stuff. Probably more somewhere else. Looks like there are fuses to the dummy lights...

I have a 4WD 1925 and a 1630 4WD with SS that is a parts tractor. I was considering putting the SS on the 1925. Anyone do a swap? I know the SS $400 bearing is bad, and I'm missing the short shaft on the front axle I think about $350. I probably need to do seals and stuff too, but the 1925...

Added it this weekend. much better. If still will move every once in awhile, but not much. Some areas were still a little wet.

Did this yesterday with a harley take.

So I think you need to look up a 1710 on Messicks, because I didn't see the diverter under the 1510 schematics. According to the picture, #7 and #6 are O-rings. #3 is an adapter that goes onto the pump, and the #2 slips inside of that. It looks like it is a slip joint design for tolerance...

JD calls it the Load Check Valve. The external ones are usually called Lock Valves. Lock Valve 1/2" NPT 25 GPM 3 PSI | Check & Lock Valves | Hydraulic Valves | Hydraulics | www.surpluscenter.com

I just bought a T6 Harley rake with the hydraulic angle. The cylinder keeps slipping since the T6 does not have a lock valve on it to lock the cylinder and keep it from moving. I found one on Surplus Center that will work for $120 that I can put on the T6 with some new hoses and such, but I...

Does anyone know how to setup the rocker arms on a 1910? They have 3 individual rocker arms, and not the one shaft for all 3 like most other engines. I have the IT manual, and it mentions that they have 3, but says nothing about how to set up the shims. I suspect, that the rocker arm should...

I have a 550 that I needed to replace the solenoid on it. I couldn't get the solenoid off, so I pulled it apart and had to remove the solenoid lever pin. I didn't know it was eccentric, but now I do. The service manual has the dis-assembly, but I can't find the assembly section or how to...

I bought these cup holders from Amazon for $6 for 2. Since one tractor I was leaving them on was going to be outside I used my cheap HF grommet kit and put a hole in the bottom for the rain to drain. Straps are long enough to go around the ROPS. Meant for a Jeep. They have handles too if you...

$150 and it's gone.

I have a batwing style 3 head flail mower, missing the rear mower, that is in really rough shape. It looks like the one in the picture, but I can't find a name. I think it is an Alamo Interstater maybe? But an older version of it.

Built this today out of some expanded metal screen. Bent the edges over 180 then the 90 so they didn't have sharp edges and gave it some strength. Only put on the 2 mounts for 2 bolts. I might add an upper one later. Since someone will ask why I painted it black, we'll I really like the...

Any one have an electric copy of the service manual for a X485 they would be willing to share?

Here is the finished version.

Anyone have any good home made trailer tongue locks? Most commercial ones I have seen are crap. I like this one from etrailer but at $40 each I think I will make them. Looking to get 2 at least maybe 3 I think I can make it better and use a better lock.

I need 4 new tires. I was looking at a semi local auction that had 4 new Power King SD+ tires, but the auction fees, they are about $100 cheaper than what I can but them online for with free shipping, so not worth the 5hrs of driving to get them. Anyone on have any good advice on brands that...

Some reason, I do not have access the for sale adds, but I have a 702 snow blade off a 1700 for sale. A bit rough, but not rusted thru holes. The frame is all there that I know of. It has the hydraulics including the hydraulic tie in block for the tractor side, but the cylinders and valve is...

That odd, I have used a couple of them, and they all seem right on within a few tenths I would say. I would not say they are very accurate compared to a high end voltmeter, but to know if you are getting 12.5 volts or 13 volts they are worthwhile. You will definitely see when the alternator...

I've read a lot of reviews here on the Titan pallet forks and there were a lot of bad reviews, but they were all from years ago. I was looking at the pallet forks below because I already have several sets of forks. The Amazon review seem good, so I was thinking of giving them a try. Anyone...

This tractor is new to me, so no real history, 1600 hrs. The loader and rear lift seem to not have any power. It gets worse when the tractor gets warm. I put a pressure gauge on the loader connections, and they are not constant. It seems if I play with the controls, the pressure will get up...

Looking to buy a set of AG tires for a 4210. I have R4's that I would sell or use as trade deal. My R4's are about 35% or so. Didn't measure.

I've read some posts here but have not seen any that are the same as my issue. I just bought this tractor, and the fuel gauge was pegged to full. I looked in the tank and the float was broken off. I put in a new sender and it does the same thing. When I disconnect a wire, the gauge drops...

I am replacing the rear axle seals on a 4210 HST. It looks like there are 2 types of seals. One recesses and one just on the shaft. I do not have any recess for the sel. The parts diagram shows the seal looking like it goes on the outside of the housing. When I took off the housing, the...

I am looking for a service manual that covers the European side shift backhoe with the hydraulic motor swing and not the hydraulic cylinders. I bought a service manual online from a European seller, and it did not have it.. The motor part number is: 7707787. I have the parts breakdown...

I was looking at the parts breakdown and I was wondering if anyone knows if the seal kit does both pumps or just one? The diagram notes the parts for both pumps with an (A), but when I googled the kit number, and Amazon has it and shows only one set in the picture. I'm not sure if I need 1 set...

Does anyone have a electronic copy of the owners manual for the 503 cutter? I would like to see what they recommend for the oil and such. thanks.

Anyone have a copy of the LVB25087 diverter manual they can send me?? I am trying to do my own configuration and want to see what JD did. Thanks.

I just bought a used 4410 with 800 hrs and the ehydro. My neighbor has the same tractor, but mine is slower than his. There are no error codes flasing. I read about calibrating the sensors, and I will try that. Since there are no error codes, how do I erase the current calibration? Do I...

Looking for a set of ag tires for a 4410 John Deere.