Search results

I am at a crossroads here. I have a JD 3032E, which has 31.5hp and a Belltec TM-48 hydraulic post hole digger. According to Belltec, the ideal hp is 50hp, with 28hp minimum, so I have just barely enough. I don’t have rear remotes but would get a BLV10461 kit which would add 4 spools that the...

I need to bypass the safety switch, are there any halfway elegant solutions to do this?

Short- Recently got a 2010 3032E, but I know this is very similar if not the same hydraulics as the 3038E. The FEL and power steering work as it should. Rear 3PH does not move. I don’t know if they worked before or not. I do have the tech service manual Long- I rebuilt the lift cylinders as...

I resurrecting a Bull and the tranny is frozen/rusted together. What would be a good method to free this?

Does someone know where (or have a copy of) I can get a service, operators and/or parts manual for a 485 DI?

I was looking at Baumalight's site at the TX12 specifically, and it had a warning in the manual to not use for over 2HP motors or the generator could be damaged. I emailed Baumalight and they confirmed, none of the TX series are rated for more than 2HP regardless of watts, and they recommend the...

I am looking for a whole house generator but want to get the sizing right. My well has a 3HP pump on 240. I measured the inrush amps on one leg with my clamp meter and it went to 42A. A couple of questions 1- Since each leg is 120, is that 42A on 240V or 21A on 240V? 2- Is there a way to...

I searched but not much came up on these. This has recently come on my radar. Are they good tractors? Reliable? Any big problems? Spec wise, this appears like it would be a good fit for my needs TractorData.com CaseIH Farmall DX55 tractor information TIA.

Tractor is a L2600DT. Fluid is good but the 3PH won't raise. I have removed the tranny cover and inspected the control valve. When the valve is removed, I can blow compressed air into one of the ports and it does raise the lift arms while on the bench. But when I do this with the control valve...

I need some blades for my Befco flail mower. I know there are a few different styles depending on the cut that you want. But does the brand or size matter? I mean, so long as the bolt can go in the hole, does anything else matter? These seem to be all over the place too in terms of price.

I have an older BEFCO H25 flail. The sprig that connects to the tensioner popped of, which caused the belt to jam. I now need a new belt. Coupe of questions- 1) Does anyone have a user/service manual for this? 2) Does someone know what size belt is needed? 3) Is there a pic that details how to...

Had a tire casualty this morning. Popped off the rim after I ran over a cedar stump. :( Once removed, I see that I have a pretty nice slash in it, too big to patch, so I am in need of some ag tires. Manual says 7x16, which appear harder to find than I thought. Any suggestions where to get 1 or 2...

Just got a Kubota 2500 and picked up a middle buster today. But it doesnt look like I have any pins for my lower link on my hitch. I tried to find a parts diagram, but havent yet. So 1) what size pins do I need for my lower link and 2) where can I get a parts diagram/manual? I have the...

I live in Central Texas and has lots of rocks underneath my ground. Taking a shovel will not get you very far. What implement should I use to clear the rock as well as turnover the dirt? Will I need a tiller, plow, rake or ??? I know I will need to manually clear them once they are up on the...

I went to look at a low hours (187) L2500 Kubota today. While I was driving it around , I heard a loud pop. Turns out the oil cap blew off. The owner and I checked the breather tube and there were not any blockages. I then drove it for another 5 minutes. It did not blow off, but I did remove...

Hi, I am seeing numerous B7100 (some HST) that say the HP is 20. But according to tractordata, it's 16. Is there a 20HP b7100 out there? Or are these sellers just misinformed?

I am not sure where this goes, so please move as necessary. Would a tractor make a good fork lift? Does a PTO have more lift capacity than putting some tongs on a FEL? I am actively looking for a tractor, but need a forklift too, something that can lift 1500-2500 pounds. Thanks.

Looking to hear people's opinions on Lamar trailers. I cant find much on these.

I have been doing a lot of searching here, but decided I would post this and get some experts opinions. I purchased 5.5 acres recently. About 1-1.5 is grass that I need to mow regularly. About 2-2.5 acres acres wooded/tree'd and the rest is more field like. This has a semi-gradual grade to it...