Search results

I just got a campbell hausfeld wg2160 mig flux core wire feed welder for my birthday from my wife and daughter. Not my personal pick but it was great of them to get it for me. My question is if anyone knows if any other brand of nozzles or contact tips that will work with this welder such as...

I have a MF 165 that I am putting a pto hyd pump on to get a faster loader speed.The loader is now hooked to the auxilery hyd pump on the lower left side where the pto lever is. My question is scince I don't need the hyd from the tractor can I just cap off the hyd outlet and inlet that it is...

I have a MF 165 that I am putting a pto hyd pump on to get a faster loader speed.The loader is now hooked to the auxilery hyd pump on the lower left side where the pto lever is. My question is scince I don't need the hyd from the tractor can I just cap off the hyd outlet and inlet that it is...

I'm putting a new pto pump and control valve on my tractor with a add on oil reservoir to run my front end loader and a friend of mine told me that I didn't need to put on a return filter as long as I used new clean oil. I told him he was wrong. So who's right him or me.

I'm building a hyd reservoir and I see that there are stamped and forged weld in tank flanges. Which is the better to use?

I'm building a hyd reservoir and I see that there are stamped and forged weld in tank flanges. Which is the better to use?

I have noticed on most hydraulic reservoirs that the suction and return ports are at about the same level near the bottom of the tank. Is there a reason for this or can the return port be put in at the top.

I came across a 540 rpm hydraulic pto gear pump that had been reduced at the inlet from 1 1/2" to1" and reduced at the outlet from 1 1/2" to 3/4" and I guess they were trying to reduce the gpm. My question is can you reduce the gpm this way without causing some sort of problem? I'm...

I came across a 540 hydraulic pto gear pump that had been reduced at the inlet from 1 1/2" to1" and reduced at the outlet from 1 1/2" to 3/4" and I guess they were trying to reduce the gpm. The pump is a Gresen Minniapolis ,there is a number 096 on the front and an A3 on the bottom.I'm guessing...

Is 303 hyd oil a good oil to use and can galvanized pipe fittings be use in plumbing in a hyd system such as tees an elbows on the pressure side.

I'm installing a Prince 21 gpm pto pump with a Cross 2 spool control valve that is 30 gpm with adjustable 2500 psi relief valve and is open center. Do I need an extra relief valve between the pump and control valve?

I have a DuAl 340 loader mounted on a mf 165 gas tractor that I bought used an I don't know all the specs for it.Right now it is plumbed into the auxiliary pump on the lower left side where the pto lever is. It was sort of slow when I got it a year ago but now is even slower.Checked with local...

How do you tell the difference between a perkins gas and continentel engine on a mf 165. Also how can you clean the hydraulic filter when there is no acess port and the left side plate is where the auxilery hydraulics is hooked to so you can't get to the filter as described in the manual.

Can a 1000 rpm pto pump that puts out 23 gpm 2200 psi be run on a 540 rpm tractor and if so what would it do to the gpm and the pressure out put.

I farmed most of my 55 years but the last ten I have been managing a Trading Post in the Idaho high desert. I have a tractor that we use around here to move snow and to move pallets of freight and sometimes I need some info on repairs and this looks like the right place.