Search results

I have a 2000 model JD 5105 with 2 rear hyd remotes. A while back the regen valve (#2) would go down, but not up. The lever was actually bound up and would not move when I pulled back on it. It pushed down fine. It worked fine the day before. I removed the cap off the front of the valve (#17)...

I have a 2000 model JD 5105 with 2 rear hyd remotes. I have a 553 loader plumbed into those rear remotes. The float valve (#1) is hooked to the loader up/dn and the other valve (#2) is the bucket curl. Yesterday the valve that operates the curl would go down, but not up. The lever was...

My 2000 JD 5105 (45 hp) had an over heating issue almost exactly a year ago. I flushed and replaced the thermostat and all seemed good. A few days ago I was bush hogging and saw the temp gauge in the red. I shut down and got it back to the shed the next day and blew out the radiator. Tried...

Bearing on a chopper on a Do-All went out. How does the silver piece on the shaft come off? I think the piece next to it is a collar to keep the chopper centered? The bearing housing is on the ground. It is a John Deere Do-All. Thanks

2014 5085e cab and H260 loader. 3 rear remotes and corner exhaust. 500 hours and about a year left on warranty. Tractor is in good shape. Asking 45k Good price or no?

I have a JD 5105 4wd (45hp version). I would like to add a hydraulic side link for my BB and rear blade. Couple of questions: 1. What size cylinder and what stroke length? 2. Where did you get the cylinder? (I know that I may need to to weld some new ends.) 3. Can I just go with a tilt...

I have a 2000 JD 5105 that started running hot. Coolant level looks good and I have cleaned out the radiator. The gauge gets to red fairly quickly. If I shut it down, I can try it again in a few minutes and the gauge will show normal. Will run normal for a few minutes, then get back into the...

Having some problems with the headlights on my 2000 JD 5105. Have narrowed it down to the ground. The manual says the ground for the headlights is on the right side by the battery. but I am not seeing it. Anybody know where that connection is located?

I am trying to figure out why the headlights on my 2000 JD 5105 are not working. I have a short somewhere. The lights would blink on an off as you hit bumps, but now they don't work at all. Now for the part that is odd to me (as an electrical novice). When I remove the bulb and put my meter...

I have a "The Hollow" 300 spreader. Anyone have an online source for parts? Ken Sweet you there?

I purchased the blade in the pic (TuflineGB4-84) over the weekend. It appears to be a great blade, but I would like to add hydraulic tilt and offset. The offset is pretty simple, just remove the ratchet and add a cylinder. But, the tilt may be a little more complicated (or I am just not...

I have a mi-t-m pressure washer (with a briggs and stratton Intek 206 engine). The washer pump appears to have locked up. Anybody know how the pump connects to the engine? Does it just slide onto the engine shaft or is there a pin/bolt/key that holds it on? I removed the 4 bolts that bolt...

Found some 3x3x3/8 angle for a good price. I want to build a 7' Dura Grader type grader/plane for my 45hp JD5105. Will this material be sufficient for the cross pieces that hold the cutting edges? Also would like to use it for the cross pieces on the frame. Thanks

I have an old Sidewinder Pto ditcher that I inherited. Inside the gearbox it has a big single chain. The oil in it is contaminated and I want to clean it out and put some fresh oil in. Problem is, the company is out of business and I don't know what type of oil to use. Any idea wha type of...

I have a JD 5105 with a 553 loader. It did not come with parking stands. I was hoping someone might give me some quick specs on the parking stands (length, tube diameter and hole position) so I could build some. Thanks in advance.

All I know is that ist is 72" wide. Seller does not know the brand.

Does anyone know if JD part W43359 (bucket Hook) will work for a 500 series loader (553 to be exact)? I have seen threads referencing this part for 300 and 400 series loaders, but not sure if the 500 is different. Got some free pallet forks coming and I am going to build a frame for them...

This old offset disc has been abandoned at some property we lease for hunting. Overall, it doesnt appear to be in too bad of shape. Anyone know what brand/model this might be? Think its worth fooling with? Also, not sure how you would transport it.

New to the forum. I have a JD5105 (2000 model) that had 2 rear SCV's controlled by two levers beside the seat. The tractor has a 553 loader that is plumbed into the rear remotes. Is there a way to convert this to a joystick and or mid-hydraulic set up? Can I keep the rear outlets? Not...

I have a JD 5105 with a 553 loader and I really would like to get a grapple rake type bucket for it. I can get couple of used grapple assemblies that I get for a song (free maybe). I currently have a materials bucket, but think the grapple would work better for me with the open/rake style...

Hey, first post here. Did a quick search, but did not see what I was looking for. What would be a fair price for a 2001 New Holland TN65. 2WD, canopy, 500hrs, good tires, no remote hydraulics. I would say good, not excellent condition. Needs a seat. Also, any idea on ballpark $$ to add a...

Moved to NH board