Search results

Is there a suspension seat upgrade available for newer Kubota zero turn mowers? I'm helping my 80yr old father shop for a mower.

Can my Kubota L6060 with a third function remote handle a loader mounted 18-24”auger? I’ve got a lot of trees to plant in the coming year and thought it would be a nice way to dig the holes.

I think I want a 12’ batwing chopper to maintain a hunting lease. Mowing around 60 acres annually of 4’ tall grass/weeds and brush up to 2” thick. The field isn’t all that thick, but some is. The property has some rolling hills but nothing steep. My 6060 is open station with a loader. Will it...

Anyone using a lithium battery on their tilt or dump trailer? How do they perform? I’m considering one for my recently purchased tilt trailer.

I'm in the market for a 22' car hauler for my Kubota. What I've been noticing is that most of the trailer length is in front of the axles, putting a lot of weight on the hitch. What am I missing here? My last 22' trailer had the same problem and I recently sold it. I was constantly being...

I’m in the market for a new 20’ trailer for my Kubota L6060. It gets moved a handful of times a year. I’m leaning towards an aluminum trailer this time, and I like the looks and longevity of an aluminum deck. I’m also considering a full tilt on this one. Is an aluminum deck really more...

Any suggestions on the two types? I’ll be mowing with a 60hp Kubota if that matters. Also, the property I’ll be mowing has some small rolling hills.

I'm taking over maintenance of 40 acres of crp fields that need to be kept brush free. I'm debating on buying a larger chopper for my Kubota L6060, or a sprayer, but am looking for recommendations. I currently have a 6' chopper and was looking at a Rhino 10' batwing. But they are a large...

I am in the market for a new brush chopper to use behind my 60hp Kubota. I’ve had good luck with a 6 foot in the past, but I’m wondering if I should consider the 7 foot? I don’t mow enough to justify going to a multiple spindle mower, so I’m going to stick with a single spindle, probably Land Pride.

I've got a hunting lease that I'm going to start to mow/spray on a rotational basis to keep the woody plants at bay. It's in a federal program for grasses/nesting cover. There are 6 different "fields" that I will rotate through, mowing each one every couple of years. This first cutting will...

I’m going to buy a 7’ Land Pride and they come with either a single or double tail wheel. What do I want? I’ve only ever had a single.

I'm in the trailer market and am going to buy an aluminum 22' with fold up ramps. I'm leading towards a 14k (7+7) over a 10K torsion axle setup. I'll be hauling my Kubota L6060 with loader which is around 5,000lbs plus the additional weight of any implements it might have attached, maybe...

I noticed this weekend when driving down the road from one field to another, separated by about 1 mile, I had to continually turn my steering wheel counterclockwise to keep the tractor going straight. In that distance of a mile I made four complete counter clockwise revolutions of my steering...

I’m looking to go this route on my new to me Kubota L6060. Any suggestions as to which company makes the best unit?

I bought a used 2018 L6060 open station and would like a better seat. I’m 6’2” and 235lbs. Is the oem air ride the best option or should I look at something else? I would prefer to sit a few inches higher than my current suspension seat if possible.

I just added a quick hitch to my Kubota and the two times I've used it I've inadvertently leaned against the top link when attaching the pto. The result is two ruined shirts with grease on them. I'm wondering if there is some type of cover that is made to keep the operator from getting greasy...

Am I crazy to spend $25k to upgrade to the L6060? My L3940 has been very good to me and I'm almost to 1000 hours on it. My annual hours are typically 100 or so. I plant food plots, have a small cattle farm, and clear trails and other things around the house. The 3940 has never let me down...

I致e got a zd1211 that I love, except for a droning when the blades are engaged that is hard on the ears. It goes away when the blades are turned off. Is there a way to get rid of this? Maybe change to a different blade? I致e got a mulching kit on it, but the drone was there without the kit. I...

I'm looking to add a leaf blower to my Kubota 3940. The units specifically built for the 3 point are spendy! I'm looking at buying a Bill Goat push blower and fabing a way to mount it to the FEL or 3 point. I tried search without much luck. Who's done it here already? Pros/cons? Suggestions?

I知 wondering if anyone has done this yet? My tractor is a Kubota. Here痴 what I知 looking to do. Any suggestions on manufacturers making something like this? I already have a third function remote with lines to run my grapple. Front Loader Hydraulic Quick Attach Coupler - YouTube

I was doing some digging with my bucket the other day and didn't notice one end of the quick attach bucket had popped out of the loader arm. I ended up bending something because my quick attach will no longer line up when installing front attachments. The right side lines up and you can get...

I wasn't sure where to put this question so fee free to move it mods. I have a 30'x40' pole barn with 12' walls, OSB sided with vinyl over that, and concrete flooring. I'm in the process of insulating it. Last year I put up a steel ceiling and had insulation blown in. This coming spring I'm...

I have a new 1211 that I'm thinking about putting a grass catcher on for leaf pickup. Anyone using one that could comment on the quality of job it does picking up leaves? Wet leaves? My previous Kubota had a mulching kit on it, while the 1211 doesn't. I like the cut of the 1211 better than...

Pronovost Puma PUMA-72-IV - Pronovost MK Martin Meteor (68" cutting width) MK Martin | Meteor - Pull Type

I've been running a plow on my 1/2 ton for a few years now maintaining my personal drive of about 200' and also helping out at times on our 1/2 mile private drive. I recently sold the truck (kept the plow) and bought a new GMC 1/2 ton. However the thought of plowing with my new $45K truck...

I have some big rounds I have to deal with from time to time, and I'm getting tired of fighting them into position on my vertical splitter. I know they make upside down splitters for skid steers. I have a third function valve and remotes on my FEL for my grapple already. Can I use these and...

I live on a 1/2 mile private drive that serves 5 residents. We're sick of dealing with the existing gravel road and potholes. We add gravel every year to the problem areas, but in reality we could use 6-8 inches of new gravel over the entire road to get better drainage. We've got sand below...

The neighbors and I have decided to pave our 1/2 mile private drive. I'm looking for any tips on spreading gravel along the exposed edge of the asphalt (total of 1 mile!). I've got a Kubota with fel and various attachments. I've seen the county road crews drop gravel out of their trucks in a...

After twelve years I've finally decided to insulate my pole barn that I store my tractor in. First step was to install corrugated steel ceiling panels, which is done. Before I move on to the actual insulation I want to figure out how to attach my electric hoist anchor, which use to be attached...

After 10 years the gas company has finally run natural gas on my private drive, so I'm going to add a furnace and heat my pole barn - 30x40x12. Problem is it isn't insulated, except I planned ahead when I built and put in insulated doors. I want to tackle this project myself. If I start with...

I have a 2008 Kubota L3940hst. I'm looking to add hydraulic top and tilt this year and want to educate myself before I call the dealer - not sure they've added one before. I understand the basics, but I want to be sure that I don't need any additional hydraulic capacity on my tractor to add...

Not sure where to post this question so I posted it here. I've got an 1 1/4" well that I drove a couple of years ago to provide water to my hunting property for drinking and the ocassional spraying that needs to be done. It's about 45 feet deep and I have been using a pitcher pump on it as...

I'm looking at purchasing this spring a road grader to maintain my 1/2 mile drive. I've searched the forums and found a couple old threads. Just curious if anyone has any experience with these three units. Likes vs dislike? The duragrader is a little more money than the grade master, not...

I've been looking for a used box frame style disc for a year now and have only run across the angle iron frame style. A local dealer took in on trade an angle iron KingKutter that I'm thinking about buying and adding weight to. My question is how much additional weight is too much for the disc...

I've got a 4x8 spring tooth drag I bought from tsc and am looking to add a lifting mechanism to it for my tractor. I'm leaning toward using a boom pole, but would like any comments or experiences with this method. Pictures of your boom pole lift would be even better! Thanks.

Yea, that right - a toilet project. I've got an 80 acre hunting paradise that I bought last year, and on it is a steel barn that sits 1/4 mile back in the woods - i.e. no electricity. I drove a shallow well (45ft) last summer for drinking water and lucked into a flowing well that produces at...

I have a piece of property that I want to have a 1/2 - 1 acre pond dug. The problem is that where I want the pond is an area on my property that is heavily wooded. I'm debating how I want to tackle this project. Do I pay a tree company to clear the area and chip everything in place? What...

I need help. I am purchasing a grapple for my Kubota L3940 that does not currently have any rear remote valves. The dealer I purchased the grapple from recommended adding a rear remote and running hydraulic lines from the rear up to the front for the grapple. A different dealer recommended...

I have a Kubota L3940 (40 hp) with the LA 724 loader which is rated at around 1600 lbs at bucket center and around 1900 at pivot pin. This will be the first grapple that I've owned so I'm looking to shorten the learning curve from you more experienced grapple owners. My main use will be to...

I had soil tests done on my property over the winter and have a question concerning the affect plowing will have on my ph level. I have two plots that I want to plow under that showed ph levels in the mid 5's. My samples were taken from the top 6 inches of soil, and I know that I will be turning...

I'm putting in a 2 acre food plot in the middle of my woods that I had clear cut then the stumps removed by an excavator. I am purchasing a two bottom plow to pull behind my 40hp kubota and am planning on turning over the plot and then disking. I assume there are still a lot of roots in the...

I will be driving a shallow well this spring and was wondering if there are any tricks out there using a tractor that would make this job easier? I have a Kubota L3940 with loader. Any ideas?

I'm looking for a way to increase the amount of firewood I can load into my fel bucket. I want to cut down on the number of trips to the trailer. I have seen in a previous post where someone on here made one, but I don't have the tools or welding skills to make my own. Does anyone know of any...

I am looking at buying a landpride scarifier to use as a chisel plow for foodplot preparation. Before I spend $700 does anyone have any experience with this piece of equipment? I have some wooded openings/clearings that need to be cleared of roots and have the soil loosened. Land Pride Scarifiers

I have the almost perfect system of getting firewood out of my woods and to my house. I have old auto parts bins that I fill as I cut in the woods. I use my tractor with fel to load the bins onto my 18' trailer (no sides). I then pull the filled trailer to my house which is about 7 road miles...

I've been a lurker for some time now. This makes me an official poster. I just traded up from a B7800 to a L3940. I needed more loader capacity to haul wood out of the woods to feed my outdoor wood burner. I also will be using it for food plotting for deer. (My attempt at being a gentleman...