Search results

I really don't understand draft angle and self depth adjustment on a three point system so I thought a tips and tricks using a three point system may be helpful for us new guys with tractors so we can learn from all the guys that have been using them for years. I am interested in anything from...

Is it normal for AG type qd's to drip a little at the female ball seal?

I have a cat 1, 30 hp tractor and I added remotes to it and I am looking at hydraulic top links at surplus center. they have two available, one with 11 inches of travel and one with 8 inches. Would it be better to have more adjustability in or out? I don't have enough experience with...

I must be looking at something wrong. On these velocity charts that help determine recommended hydraulic line size it looks like my hydraulic system should have 1/2 inch lines....but...its got 3/8" lines. 7.8 (round to 8 gpm pump). With 3/8 lines looks like it calculates to about 25 fps...

Hi, I am choosing fittings for my remotes. I am wondering if swept 90 degree fittings are better to use on the p and PB loop? I would prefer to use cheaper standard 90's but I don't know if they build more heat or restrict more to a point that it makes a difference? This loop will have four...

I rotated my tires so the valves are at the highest point but beet juice still comes out of the valve stem. How do I check the pressure? I have an issue because I discovered my rear rims are from different manufacturers and I suspect this is what is responsible for different tire heights if...

Hello from Michigan! I have a thread in the hydraulic forum but I thought some of you folks may have a better idea on this. I am researching adding remotes to my 3016. With a power beyond system you need to have a line going back to the tank. I am wondering if there are any "to tank" ports...

Hi, I am hoping someone can help me understand this. My tractor has a loader but no remotes. It has a loader valve installed like shown in this document. http://www.mahindradispro.com/manuelOperateur/Mahindra/3016/ML115%20&%20116_OM_en.pdf From what I can tell the loader valve has a power...

On each cylinder of my loader (piston side). There is an o ring around the cylinder. It's this way on all four cylinders. Is this normal?