Search results

After being inspired by the installs on here, finally got around to doing mine. Mounted on FEL mount, before the lift pump. Left the old one after the pump for double protection. Mainly wanted the Racor for the water separation (had a **** of a time with water and the old plow truck last...

So got to thinking, I have an old underhood Fisher valvebody from an old Speedcast (conventional) plow setup along with cables and controls. I want to use it to control the angle function for my yet to be fabbed FEL plow, but need some input from those who know tractor hydro systems better...

I am looking to fab a quick attach plow for the FEL on my Kioti, not sure if I should go with a rear remote kit or third finction. I want to maintain all controls on the FEL but be able to angle the plow, so would a rr kit or 3rd function be my best bet based on... I have nothing that needs a...

....i am assuming you are running some sort of tractor hydro fluid? My project will entail using the plow on my truck and tractor, wondering how the electro-hydru pump on the truck will do with it instead of normal plow or ATF fluid. Anyone have experience with this?

Anyone ever make a plow frame for mounting a plow on the front, but not using the loader arms. Not sure I want to go with a loader mounted plow, my friend had a frame made for his JD to mount a truck plow, forget what it looked and how it worked though. Anyone have any pics/links/ideas/etc?

Since I have a neighbor who is a little crazy (to the tune of threatening the neighbors lives for the past two years), and the state of VT seems to not care to do anything, it was time to protect myself when working in an open cab.....added a Blackhawk holster for the Beretta!:thumbsup: Mounting...

Anyone have an online source for those little T bolts that hold the shaft cover tube to the outer ends? I broke one removing the cover and no JD or Kabota dealers around here have them nor can get them. Seems like every other shaft uses the turn and remove as opposed to those stupid little...

Just curious if there is a bias....My wife and I own only manual transmissions (motorcycle to Bombardier SW48 and everything between) to include the DS3510. Those with HST or gear, is your daily driver an auto or stick?:cool:

I just got to use my 68" Metero for a little bit this past weekend, and have question for those that have run a snowblower with shear pin shaft..... I got the blower with an aftermarket shaft, so after consulting with the local JD dealer we went with a whole new shaft that they use for their JD...

Used an old shovel/flashlight/whatever mount I had laying around to make a quick access flashlight mount for the DS3510.

After my "wife" bent the OEM Kioti toplink when raising the rear weight, I had to get a *gasp* JD toplink (closest dealer to me)....well, the ends are larger ID (stronger) but will not fit in the OEM Kioti top link holder. To resolve this, I welded a half chain link to the body of the top link...

Installed with tensioners....went with the MPCs for the asphalt driveway, but glad for clearance issues with lower links. In any case, Aquiline MPCs fit like a glove!..VERY good fit! Chains, standard install, took 2hrs for the right side, 30 min for other. Always easier AFTER you have link...

Every stinking year I hook up the Myers on the Explorer plow truck something electrical is wrong. This year I get no raise, only goes left when raising. Probably the "B" coil, but then the stud on the "C" valve breaks while taking off the "C" coil to test.....so now I'm GUESSING I need a new B...

Living on a rather busy rural highway in VT made me want to have a rearvie mirror....mounted on the craossbar, drilled and tapped for four 1/4 x20 bolts. The mirror is a Jeep rearview from Summit.... Snowblowing for the neighbors that live down the road also led me to want a strobe for when...

Picked up a used 2010 68" Meteor, but there is no shear pin for the impeller. The auger has one, but the PTO shaft that came with it has no shear pin, and I do not beleive the guy had a slip clutch. Manual mentions the shear pin should be on the shaft, but not there. Anyone have any experience...

Wanted to get a plate for simple lifting purposes, but realized that I could do the same with my pallet fork plate. I wanted to eliminate the forks for lifting stuff, so I added some D rings on the outside. After some thinking, it seems the outside was the best place to avoid intereference...

Anyone have them? I have a paved driveway, and ice chains are too agressive. I run Vbars on the plow truck, and they are not too bad on the asphalt, but the MPCs look to be a good US made compromise for traction and non destructive to pavement. Also looking for a source for them, can't seem...

After much searchingand dealer run around, Rick (member name "wallace") helped me out by providing me a block heater that would fit my DS3510, so HUGE thanks to him for knowing and providing a block heater that would work! Here's the install for anyone interested.... Removing muffler makes it...

Always like to be prepared, and don't want to use the bucket hooks as such, so I made this plate for future use...

Anyone know of one that will work? 0/2 for the two dealers i tried, hoping someone has installed one!

Called the two dealers near me looking for a shop manual and parts book, plus interested in a remote, both tell me no problem, call you back with prices......two weeks pass, nothing from either. Anyone in the New England (or anywhere that will ship) care to actually call back a customer and...

So although my $99 RR fit my Kioti's 60" bucket OK, I could not stand having a tooth stick out of the bucket, so I pulled a tooth.... Fit problems: it worked, but lost the strenght of the outside tooth, prob never be a problem, but I can't let things go! Plasma cutter had a workout! No...

....if you have a FEL that is. After thinking for HOURS and searching here for the best spot for a smal toolbox on my DS3510, it finally hit me today...the FEL mount! Pics....oh, and there is WAY more stuff packed in there than the one pic shows!

FINALLY got my tractor!.... First modication, lights and hooks.....no pics of the front and rear lighting, but switched to LEDs First project, added a real parking area for the plow truck and a driveway rehab... At work... Even the wife got into it....

Anyone know if they sell a paper version? Or can it be bought in PDF form? Dealer is not sure if you can by a version of each model or if a master CD is the only way to get one. Anyone have a source?

Starting to dig into my DS3510, a few questions...... 1. What is the orange plug bythe dipstick? 2. There are two red oil plugs, on in the back by the 3pt, and one right between the feet on the trans tunnel....I see the sight glass, but do those two fill points service the same fluid, the one...

Only way I can get the rear to raise is using the FEL, assuming this is not normal? If not, what could cause this? Also, the book and actual controls for the FEL differ in that left dumps and right curls the bucket. book says opposite should be the case, anyone else want to tell me how theirs...

Looking to add aux lighting to the ROPS at the top, but not sure if it offers a ground or if I will have to run another wire for ground. Using Grote lights that ground with the mounting stud, and I need to know before I order 1 or 2 wire plugs for each light. Oh yeah, i don't even have the...

Though my Kioti will not arrive for another 3 weeks, I have been working on "improving" and restoring a Meteor 51 rear blower. Question: final paint is narrowed to match the Kioti (orange and black) or to honor the great people at MK Martin who have proveided me with tons of info...I'd go...

My wife's uncle will drop off my ds3510 in mid june, first tractor after years of looking, dreaming, and convincing the "boss":laughing: Sure I will have plenty to learn and add, looking forward to my new toy.....er, tool I mean!

Take delivery of my new ds3510 in about 3 weeks, got it for 14998 with loader and loaded r4s.....how I do?