Chuck for Milwaukee M18 drill motor

   / Chuck for Milwaukee M18 drill motor #1  

rScotty

Super Member
Joined
Apr 21, 2001
Messages
9,584
Location
Rural mountains - Colorado
Tractor
Kubota M59, JD530, JD310SG. Restoring Yanmar YM165D
Our Milwaukee M18 Fuel brushless drill is a decent tool, but this one came with a weak chuck. I eventually bought it an expensive Rohm chuck - which worked a few years and then just failed completely. Now that Rohm won't grip or let go dependably.

So it is chuck time again. Any recommendations?
Thanks,
rScotty
 
   / Chuck for Milwaukee M18 drill motor #2  
When the chuck finally got to where it would not hold a bit without slipping on my M18 Fuel I replaced it with Milwaukee's OEM chuck which as it turned out was better quality than to chuck that came on the drill to begin with.

My biggest problem was getting the retaining screw out, I don't know what gorilla installed it but he must have had an extra bowl of Wheaties that day.
 
   / Chuck for Milwaukee M18 drill motor #3  
When the chuck finally got to where it would not hold a bit without slipping on my M18 Fuel I replaced it with Milwaukee's OEM chuck which as it turned out was better quality than to chuck that came on the drill to begin with.

My biggest problem was getting the retaining screw out, I don't know what gorilla installed it but he must have had an extra bowl of Wheaties that day.
I'm sure you know it has left hand threads, but they can get tight.
 
   / Chuck for Milwaukee M18 drill motor #4  
Yep, well aware
 

Tractor & Equipment Auctions

ROLL OFF BOX (A53843)
ROLL OFF BOX (A53843)
2011 26PS PROWLER 5TH WHEEL RV (A52472)
2011 26PS PROWLER...
FAE UML/SSL 150 VT BL HYD MULCHING HEAD (A51406)
FAE UML/SSL 150 VT...
2017 HITACHI ZX350LC EXCAVATOR (A54607)
2017 HITACHI...
2000 SCHWING P88 PORTABLE CONCRETE MIXER (A51247)
2000 SCHWING P88...
1983 Case 580D (A47477)
1983 Case 580D...
 
Top