zzvyb6's latest activity

Why the high RPM when engaging and disengaging the PTO? Not that it should break fasteners, but I always use the lowest RPM possible.

Consider removing it and using a lateral drawbar attached between the lower links. This will/may require a longer PTO shaft as well...

A lot of people I know had to withdrawn because of year before's income tax debt. Mine is way up. I live off of 4 S.P.I.A.s that pay me...

3pt rototiller/ Wait for a heavy rain. Wear ear muffs to lessen the noise. The dirt & sand that comes up with it will disappear after...

I'd get me a new seat or find better diapers.

I use graphite lube on the 1012 chains. If you add transmission fluid to the WD-40 mixture it works fine. I have a separate...

I use a 'Tree Shear'. Basically a horizontal scissors like gripper. Works perfect for 3-5" trunks (limited by loader capacity). I use...

Not for me. I get to drop off the large stack's in a customers pole barn with a very tall roof line. I also have a 1012 pull behind...

Just picked the Baby up at an auction. New Holland Super 1049. 160 bale capacity. Ford 351 Cleveland, 4 speed manual, 2 speed rear...

What's the reserve on your 1049 ? I'd like to get it for a couple of struggling gals in Stockbridge. I'd start there. I'd believe...

But you need them when the sun shines ....

I use only a dry graphite lube. Oils or grease collects dust & dirt which hardens after heat and time, making it more difficult to...

Think the process is learning how to lift.... You are supposed to come into edge of pile and scrape up with lip of loader.... Not bury...

I have an FS-130, Starts on the first gentle pull. You'll have to get used to the sound of it. Burb instead of whine.

Before you go that far, rethink the no-start situation. No crank?, fuel solenoid clicks?, bypass the starter solenoid and see it it...