zzvyb6's latest activity

Around here, a blue nozzle cover signifies gasoline. Green is used for diesel on a nozzle that is too large to insert into a gasoline...

In my humble experience, you should consider having TWO fuel dispensers because you are likely to be facing TWO empty tanks: the mower...

I've gone to 2 100 gal tanks with 12V pumps, each with built-in filter cartridges. I can't lift the 5 gallon containers comfortably any...

Made my own using an ancient PU truck plow. Yes I have the JD QA plates, but the skid steer plates are cheap, then just add some pins...

Yeah, I forgot about the loose needle brake issue. That's the real need. If the plunger gets stuck by the stops, that's a sound the...

The 4 place snowmobile trailer with that hay bundle and axle positions gave me about 60 lbs of tongue load. That'a about 1/2 a tank of...

Yep. That was me in my Y2K 'vette. Standard Draw-Tite bolt-on hitch was readily available. I was being passed on I-96 by a blond in a...

Switch the couplings so that curl and lift are swapped. Then see if lifting the loader arms is a problem and curl is now ok. That...

Back down the ground travel, windrow size, or sharpen the plunger and stationary knives. There is really no need to get a slip clutch...

Ensure that the wire is being pulled from the correct spool direction.

I have a set which lets you flip it from expand to contract by moving the hinge pin. Weak link for me has always been the tips bending...

Well, new ones don't arrive dull. It's not done for the dirt, but for roots, weeds, grass, etc.

Sharpen the blades ! Grass isn't being cut, just pulled out by the roots. Also try backing into the furrow instead of going forward...

Be careful moving that load. That much mix + water + sand + gravel (or just the pre-mixed recipe + water), is VERY heavy. Have a lot...

I have a JD 1435 diesel, 72" front mower, 60" broom for snow removal, and I also can run a 540 rpm Winpower pto generator on it with a...