Scrolling through old emails I remembered someone sent me these and I forgot to post them so dug it up to add them, maybe someone will find it handy one day
Just want to make sure I don't do something stupid and screw up my new to me tractor. Would there be any issues if I run a Shaver HD8 post driver off of one of the hydraulic QD's for the FEL? Figure if I can tie into that and dump it back into the reservoir, my wife will just have to hold the...
Just want a 2nd opinion on the direction of the piston/rod. I removed them all and marked which cylinder and assumed that the arrow on the piston points to the exhaust, but can't honestly say I verified that before taking them out. I installed new pistons on the rods with new rod bearing. Below...
Recently purchased a used JD 2210 with a FEL and 62" belly mower. I bought this for my wife to use, figuring that a "Good" name like JD and lower time tractor should be pretty reliable for her without me having to work on it all the time. She put a little over 10 hours on it when I borrowed it...
Picked up an 8' International 7 drop spreader that is missing the top, therefore, also missing the chart. Does anyone have a #6 or 7 spreader they can take a picture of the chart for me? Cant seem to find any info online otherwise and IH doesnt sell parts or manuals for it anymore. Thanks alot
Looking to use my father in laws post driver that he has set up for his mid 60's JD 2010 on my 92 Case IH 595. He bought the driver 30 + years ago and at the time the dealer changed out the control valve so he could use it on the 2010.
He connects the pressure to the loader QD and runs the...
Going to look at an early 90's Case International 595 this afternoon. I cant seem to find much info about them. Are parts readily available for this model? Any major issues I should be aware of and look out for? The tractor Im looking at has a FEL and 1900 hours. Dual remotes separate from the...