zombieda's latest activity
-
zombieda reacted to SSdoxie's post in the thread Front loader bucket crooked: H-frame twisted with
Good Post.
Sometimes the loader frame can shift on the tractor giving the same problem, perception that loader is twisted. Try this before cutting... -
zombieda reacted to Windblown's post in the thread FEL bucket not level (Horizontally) with Good Post.
A simple digital angle gauge provides an excellent reference point to check assemblies and is useful for a variety of tasks. I use one...
-
zombieda replied to the thread FEL bucket not level (Horizontally).I have a different FEL version (mine doesn't have that locking pin). But I will look for any movement between the frame mount and where...
-
zombieda replied to the thread FEL bucket not level (Horizontally).Is this something you care about? that is... is it even worth looking at fixing? I'm on the fence on this. If I take it up with the...
-
zombieda replied to the thread FEL bucket not level (Horizontally).Not sure... I will check this next operation!
-
zombieda replied to the thread FEL bucket not level (Horizontally).I put a 4' level on it.. noting the bubble positions. With the bucket lowered (on ground).. they are very close. When the bucket is...
-
zombieda replied to the thread FEL bucket not level (Horizontally).Interesting.. I took a look at the brush guard yesterday.. it's definately level with the frame, but looks a bit off vs the hood...
-
zombieda replied to the thread FEL bucket not level (Horizontally).It's new. Unfortunately I don't have any concrete to park it on. I think i will contact the dealer.... it doesn't seem like something...
-
zombieda reacted to drunderw's post in the thread FEL bucket not level (Horizontally) with Good Post.
I have the same problem with my NS6010 that I just got Thursday evening and noticed before using it just testing loader movement. I’m...
-
zombieda reacted to Coyote_CS2220's post in the thread FEL bucket not level (Horizontally) with Good Post.
Relying on level ground to reference things as straight and/or level is problematic. On uneven ground select wood blocks under the...
-
zombieda replied to the thread FEL bucket not level (Horizontally).I have not taken a level to it yet. I notice visually the out of level when I raise the bucket, vs the brush guard. Tire pressure is OK...
-
zombieda reacted to RjCorazza's post in the thread FEL bucket not level (Horizontally) with Good Post.
Another thing to look at is the loader arm crossover tube. If it's twisted even slightly, the bucket will not be level. It's not always...
-
I've had this CK2620 for only 15 hours, I noticed yesterday that the bucket is not level, its higher ~ 1" on one side. I'm not doing any...
-
zombieda reacted to deserteagle71's post in the thread How Hard to De-Green a Kubota MX5200? with Good Post.
??? Not sure what your statement means. If you are talking about the regeneration process, you have the wrong idea. My Kubota M7060...
-
zombieda reacted to jyoutz's post in the thread I hope I can prevent this from happening to other operators. with Good Post.
Wow. What an experience. Glad that you made it and can tell the story.