Is that picture a B3200? I don't have a dipstick on my unit. I opened the fill port and it was dry. I put a gallon in and looks like it will take even more. Damn.
My B3200 tractor has been sitting for a few years as I have been away. I noticed a small leak in one of the bucket hoses. I would like to top fluid off before snow gets here. I cannot find dipstick, but there seems to be a site glass below the filler port. Of course it is behind the rear...
I have B3200HST. it is 4wd with chains all around. I measure the back tires and about 60" of track width
I will be using to maintain my driveway. Driveway is about 1700' 12' wide hard pack.
A guy in town has a County Line BB5 from Tractor supply. It is a 60" blade and weighs 395lbs. Would...
I have a B3200 with a large Woods back hoe. I want to add some weight to the front to counter balance. I'll be shoveling snow this winter so want to add chains to front tires as well as rear.
I would like to know if there are kubota part numbers for bracket and weights. If I can get part...
I have the Ag tires on my B3200. I find it a bit difficult getting up my driveway when on ice. Will chains be a good investment for this winter? I am wondering how much of a difference between the two.
Thank you.
Today I put the chains on rear of my B3200. there doesn't seem to be enough clearance between the tire and the inside of the fender. The chains are binding on the fenderwell and making quite a racket. It looks like about 3/4" of clearance and chains look like 7/8"
Could this be a sloppy...
The dealer quote me $575 for service on my machine. He told me hydrolic fluid is expensive.
Does this seem a tad high for service?
regards,
Yzordderrex
Wife and I are getting ready to move to our hilltop property. Hoping to spend the winter there. Driveway is 1500 feet of gravel. A couple of steep portions and a couple of twisty turns.
I need to decide to put a plow on the front of my 07 Ram 1500 4wd or put a sno-thrower on the front of...
I got it back up on all 4 yesterday afternoon after sitting on it's side for a couple days. I figure I will let it sit for a day before I try to start it back up.
It was on it's left side. Anything I should be concerned about before starting - other than checking the oil levels and so...
Just bought a B3200 HST. Has been running for a couple hours then just hear a click and shuts down - another click and it is good to restart. I order shop manual for it, but won't be able to get down to dealer for a week or so.
I'm guessing it is the motor stop solonoid. Anyone ever witness...