xyz123's latest activity

Cleaning the echo 3510 I rebuilt carb on to give to dad for a gift. Found a security tag on it still.

To go with above

Just saving in case someone else needs to know where tank vent and lines on clone or oem 2511 is.

Whats funny that was my VM I popped the center on. Only 1 of their clamp deals out of 3 like he shows on FT one. It ever gets new echo...

Early on there were a few V-Mods that had pin holes in the lines around the area of those tiny clamps, like the worker nicked them or...

I just put 3 more 2511 Joncutters on pre-order with Scott 🥴 They will be raffle items at some excellent High School Tech Ed programs.

Fuel residue in valley of grey plastic where fuel lines meet then rearward where lines go in air box plastic. No fuel residue forward of...

I'd still be changing tank vent to see if that. Letting pressure build up and push through. Only a few bucks or 10 afm ones for 8...

I would start at checking or replacing tank vent and go from there. Easy peasy, get into trouble shooting mode. Your not the first and...

You will see your fuel lines and tank vent under there. Here I popped one for ya. Just follow your lines looking for leak.

Decal in air filter area? Pics are worth a 1000 words, show us something please. Decal in center section. Lift up that piece and look...

Check bar oil tank. I have heard of guys that have oem had this happen before. Usually after a drop etc though. Dump it in something...

Pics shown of a stihl 363 that been shipped over to US. Is supposed to be carbed version of the new 400. But thats where it stops...

Owned one. Nice built saws run like any other saw in the cc class. Hard to sell due Efco built and parts supply. Basically almost...

As a brand these saws are too new to gage reliability. But since they are mechanically identical to the V-Modest I would call them...