Recent content by xcsp

Update on my blades was able to free up that blade kept putting penetrating oil on it and pounding that pin and got that blade to move freely now.

Thanks guys for the reply I thought the blade should rotate freely on pin. I am going to soak the one blade that is solid on pin and try to free it up.

I have a question on my blades one Blade spins completely around on pin and the other blade is frozen solid on pin ????? which one is the correct position on the blade ????????. Thanks Greg

I have a Model # 700-413 Sears and Roebuck running gear for my hay wagon ,does anyone know where I can purchase a dust cap for the hub ,they had a can on it previously. Enclosed is pictures #2 picture is the cap I am looking for. Thanks Greg

I am Instaling a BHT-1 Moisture Tester Baler Mounted on my New Holland 565 It says to mount Locate a fl at spot between 12 to 24 from the rear of the chamber, about halfway up the side, on the UNCUT SIDE of the chamber NOTE: Readings from the cut side of the bale will result in greater...

Hi just cut last week with my New holland 469 haybine Replace cutter bar and a new belt, the problem is it is still missing hay and leaving high spots , I also noticed that one of the new blades was worn on the new cutter bar. What would be the solution to fixing this ???? also I have to go so...

LOOK AT MY HAY FIELD My hay field was looking great yesterday then a storm came thru with wind/rain . I am located in northeast ohio we had a dry window to bale hay the problem was before the dry spell we had couple inches rain ,well some tried to bale and they had wet spots in the bales . So...

Hello i just purchased this hay elevator it looks in good shape kept indoors just wondering anyone have any ideas as to model number ???? what year ???? it works great and purchased at a great price:thumbsup: thanks Greg

I purchased a new Game camera to check out the hay field and see how much the deer are in it at night and sure enough I foound this fellow in there. I did not have the camera set up right so hopefully I can get some better pictures of the CRITTERS in there xcsp

Hello I have a new holland 469 haybine with conditioner ,well i was making my second cutting and started to have trouble with it . I was missing a lot of hay and would get clogged up at the cutter bar , would have to go in reverse to clear it thaen it would cut good and do the same thing again...

Hello I just cut my hay friday eve then this saturday eve we got some rain not much just enough to get the hay wet. what will be my next step ????? We are going to have 3 nice sunny days near 80 degrees coming up so i am planning on baling tuesday afternoon. I have a tedder when should i...

Hello a quick question it just finished raining here in ohio and we are going to get 4-5 nice days for baling hay . My question is it ok to cut the field when it just finished raining ????? or should i wait until it drys up. i have to leave for work tonight and i would loose a whole day of...

Hi I baled some grass mix hay yesterday and i was getting loose bales tightened tension and was still not able to get twine tight on the bales. The grass was soft and when I used the baler (565) last year to bale alphalpha/timothy the bales where perfect. I was wondering if I could not get tight...

Hello everyone well here is my problem I need a rear tire 13.6-26 for my yanmar so I called around they say 3-4 months to get a tire ,at the price of $675.00 for one tire :mad: I cannot believe it they say firestone is the only one to make this tire ,and I am in trouble . any suggestions on...

:) Hello Well the weather was the best it has been all summer with a stretch of dry weather with n o rain could not believe it. My field was in desperate need of cutting and was it thick. we managed to get 400 bales :D I am happy it is over for a while and that we have nicer weather for the...