workinonit's latest activity

I enjoyed the trees up until I didn't. Most of the oaks around here are just old water oaks which is what most of these were. There were...

Yes. I made a valiant attempt to save all of the oak trees around my house. Oaks shed tons of leaves which aren't very good on the...

I've learned my lesson about building permanent structures under "beautiful" oak trees. What a mistake.

I just made flat face to Pioneer changeover hoses about a foot long. I needed the extra length anyway. Since I did that I've bough two...

Should be a wire on it. Pull the wire off and see if it blows the fuse. JDs are bad about the cold start thermistor going bad and it is...

Yea, typically they are part of the injector pump.

Sounds like maybe a shorted coil on the fuel shutoff but it could be a number of things. Not much info to go on.

I use one of these. I have one in my shop by the sink, one by the well pump and several in the house. They have large top openings that...

I really like my 1211. I looked at the Ferris diesel but the 1211 was a good bit less than half the Ferris price. That's as easy as...

On mine the brake disengages when the tractor is off. It's engaged when the PTO is off and the tractor is running.

Does it do it loaded and unloaded?

I'm guessing you bent those pushing material backward. The ones on my Hardee are bent like that and it had nothing to do with the sway...

I have 3. Couldn't agree more. The 1066, 656 and 454 were the ones that were dominant in our area. A few farmers had 1466s. I have 3 140s.

IH probably made some of the best farm tractors ever made. Then they started letting marketing and accounting guys over-rule the tractor...

Interesting voltage. I've never heard of 408 3 phase. My thoughts on the tractor driven gen is that if I'm outside cleaning up...