Recent content by Woodsman603

Ok, I'll get new lines made up. I just didn't know if there was such thing has a patch or clamp or something. Thanks all.

I may just go this route. Remove the line, have a new one made. While I'm there, have them splice in a new line at the pin hole on the old line. I'll have a new line in, and have a spare. I was just shooting for a quick clamp or something using a sleeve and some ubolts or something.

Follow up question on those reusable hoses, what am I using to cut the existing hose? Straight up angle grinder?

If it leaks and does not work, the seller refunds the money and alters the review to their specifications. XD

Those splices, so cut the line before and after the pinhole, then put those ends in then. That may be an option too.

Ah, good point. Yea, this is a hose. Flexes and stuff.

Ah, that's sort of the thing I had in mind. For $150, I'll replace the entire line. Just the one time the issue is right there, easy access, in plain sight view that I was hoping for a fix.

Woods9000 on my L3710. There's a pinhole leak on one of the lines. Its one of the longest lines on the setup too. No idea how the pinhole got there, but its away from all mounting surfaces, bends, couplings, or anything. Right on the "straightaway" on the line. Easy access, right there. Is...

The plug that connects to the unit from the rocker switch had a wire corrode off. While plowing the driveway, I angled the plow, and it pitched on way and got stuck "on". At the time, I thought the rocker switch on the joystick went bad and was stuck. Took a hot minute with the leatherman to...

Welp. Life of a rust belt mechanic,

I've done all I can to remove that spool. Since I already snapped to pins, I went deeper. I've put two notches into the plastic and used a gear puller to remove it. Won't budge at all. I'm actually tearing the plastic up and off.

https://store.wrlonginc.com/products/valve-solenoid-12gpm-valsold03s How does one remove that? Like anything else, a quick swap turned into a $100, one week wait. Thanks.

well that's a relief. just have to wait for the other parts to come in. should be a quick fix from here.

Yep. Ordered two of them. I looked for 20m for the parts breakdown, made this post, and the very next thing I learned was it was the FEL parts list, not the tractor. Found it shortly after. Also order a proper bolt extractor set. Just sucks because I have always used the welder to get a...

So I punch all that in, and right after I find that its the FEL, not exactly the tractor I need to look for. LA6841. I have this setup, https://www.(Temporarily blocked due to reports of company closure)/3rd-Function-Hydraulic-Kit-p/tra-3rd-funcl.htm and can't recall if that came with a new lever or not. I'll have to...