WM75Guy's latest activity

  • WM75Guy
    WM75Guy replied to the thread 2003 TC30 Won't Start.
    Sounds like the common problem for the TC series, internal corrosion between the battery cables and the terminals. It allows voltage to...
  • WM75Guy
    WM75Guy reacted to ranger13256's post in the thread 2005 NH TC29DA with Good Post Good Post.
    I checked everywhere online and at 3 local NH dealers for the positive battery cable. No local dealers had it in stock, all could order...
  • WM75Guy
    WM75Guy reacted to Quilceda's post in the thread HST or gear-drive? with Good Post Good Post.
    My WM75 would be a lot nicer to use if it didn't have a hair-trigger clutch. Makes close-order work hard so I use an HST tractor for...
  • WM75Guy
    WM75Guy replied to the thread 2008 TC40DA loosing power.
    Sounds like an issue where fuel is getting choked off from the tank. After it sits enough fuel flows through to let it run for a little...
    • 1753117593634.png
    • 1753117604519.png
  • WM75Guy
    WM75Guy replied to the thread HST or gear-drive?.
    My WM75 is gear, the TC40DA and WM25 are HST. The WM75 only comes in gear. If HST were an option, I would have gotten it. When mowing...
  • WM75Guy
    I'm not getting involved in the Ford/Ram/GM/Cummins fanboy stuff. I buy and drive what works for me, LOL And luckily I don't need to...
  • WM75Guy
    WM75Guy replied to the thread Bill of sale from dealer.
    The bill of sale is all I ever get when I buy tractors. I use it to show value when updating insurance coverage. Other than that, it...
  • WM75Guy
    My haul vehicle is my 2024 GMC 3500HD 4WD with the 6.6 Duramax/ Allison 10 speed auto transmission. I started with a Big Tex 14GX 14'...
    • 20250206_155927.jpg
    • 20250206_160150.jpg
  • WM75Guy
    WM75Guy reacted to Fuddyduddy1952's post in the thread Ever had one of "those" days? with Good Post Good Post.
    Recently a few trees blew down near the creek onto a pasture so I cut everything in 12ft lengths. Then I use a tractor with winch...
  • WM75Guy
    WM75Guy replied to the thread 2005 NH TC29DA.
    The TC series has a problem with internal corrosion on the battery cables where they were pressed into the terminals. It allows volts to...
  • WM75Guy
    WM75Guy reacted to JeepHead's post in the thread Harbor Freight Tools that don't suck with Good Post Good Post.
    This is the one I was looking at last night at my local Lowes. I have the 12" Dewalt DWS780 miter saw which has been a very good machine.
  • WM75Guy
    I have the Dewalt folding stand. It works great. I have the Dewalt 20V compound miter saw and a General 7" compound miter saw that...
    • 1752759079335.png
  • WM75Guy
    WM75Guy reacted to California's post in the thread TYM vs Yanmar with Good Post Good Post.
    My experience is about the same as yours. And similar results. The peace of mind, was worth it.
  • WM75Guy
    WM75Guy reacted to CloverKnollFarms's post in the thread TYM vs Yanmar with Good Post Good Post.
    I had a financial advisor once who wanted me to leverage everything and invest everything. Even down to an interest only home loan. My...
  • WM75Guy
    Sounds like poor dealer communications and equipment prep. All of my new tractors had a few hours on them. My 2024 Yukon had almost...
Top