Recent content by wichiwichi

Has anyone had any problems with leaking seals? At around 400 hours I had to replace 1 of the front axle seals. Now at 600 hours the upper seals on both sides are seeping. I'm sure some of this is due to front end loader usage but just wondering if anyone else was having the same problems.

Does anyone have any information on one of these. Not sure if 238 is the model for sure. It is a 7ft bar, belt drive, and 3 point. Any information would be appreciated.

I was just wondering if anyone had tried the meg-mo blades and if so their opinions on them. Thanks

Just thought I would post a shot of my garden.

Can anyone tell me a source for cat 1 hydraulic top links. I have found cat 2 and 3 but no cat 1.

Has anyone here done an analysis on their tractor oil? I was thinking of doing it as a preventitive maintenance routine and maybe down the road a selling point if I decide to sell. Any opinions or thoughts.

B7500DT-vs-5\'tiller-vs-heavy clay I borrowed my neighbors 5' tiller just to see what the 7500 would do. Set the skid shoes so it would go as deep as possible and it played with it, no problems pulling it at all. And this is in the heavy black clay of north texas. Will be trading mine in for a...

Does anyone know of a source for pricing implements? Any help would be appreciated.

Can anyone tell me exactly what power beyond is and what it does? Is there an advantage to having it? Thanks

Has anyone used a 6 ft blade with a B7500? I've used a 5 ft with no problem but was wondering on 6 ft. Local dealer has a sun faded 6 cheaper than I can order a 5. Any input would be apreciated.

Hope someone can help me. Was searching the web and came across a 3 point boom sickle mower . It was compatable with compact tractors , and would be perfect for ditches. The problem is I can't find it again. Hopefully someone here can help. Thanms

Growing up on the farm all of our equipment had vents, usually in the gear box filler plug. Yesterday after using my SE4 rotary cutter I wanted to check the gear box oil before putting it up. When I removed the drain plug I noticed a positive pressure. Was thinking about putting in a vent and...

I have modified the factory brush guard so that it will actually stop most brush. Added a 2" id pipe filled with lead and expanded metal. Also in the picture is a weight made of square tubing and filled with lead. Between the 2 this gives me about 160lbs and also allows use with FEL on or off...

Here is a picture of a front weight i made out of square tubing and filled with lead. Also in the picture you can see how i modified the factory brush guard.I added a 2" id pipe filled with lead and a piece of expanded metal. Between the lead in the front weight and in the guard I have added...

Just wanted to voice an opinion here. I know I am in the minority here but why not the DT. There are several reasons I purchased the B7500DT over the 7500HST, BX2200, and B2410. I grew up on a farm and drove a variety of tractors from a "B" JD to a 9600 Ford. I had previously rented an HST to do...