WI_Hedgehog

Some people say I "do the impossible." I say if I did it, it's possible.
---
Kubota BX2370

• R3 Turf wheels (front are tubed to help prevent flats)
• R4 Industrial wheels (front are tubed to help prevent flats)
• Front & Rear Tire Chains & tensioners (European pattern)
• 2" Rear Wheel Spacers x2 (4" each side)
• BXpanded Underside Armor Skid Plate
• Kubota block heater (waiting to be installed--this really has to go in soon)
  • Why I use a block heater and top-grade oil:
    https://www.youtube.com/watch?v=fu7PlRsqMyA
• 360° custom lighting (for snow blowing) (still working on it...)
• Fire extinguisher (mount)
• Star Tron Super Concentrated Enzyme Diesel Fuel Treatment (snot blob killer)
  1 teaspoon per 5 gallons
• Hot Shot's Secret Diesel Extreme Fuel Additive (injector cleaner)
  8oz / 20 gal = 2 oz (4 Tbs = 1/4 cup) per 5 gallons
• Hydraulic Oil: Kubota Super UDT-2
• Engine Oil: Rotella T6 Full Synthetic
• Front Wheel Gear Oil: Mobil Delvac Full Synthetic 75W-90
• Grease (see: Tools)
• Coolant: Zerex Extended Life Heavy Duty
• Filters: Kubota OEM (complete extra set on-hand)

LA243 Front End Loader

• BXpanded Piranha Pro Tooth Bar
• LandPride Third Function Kit (installed, waiting to be wired)
• JU Fabworks Workmaster Bucket Bracket
  • (2) 4,700# Forged in USA grab hooks
  • (2) 5,000# Tow/Grab Handles
  • 2” receiver with 5/8” center hole
• Grease zerk caps (green, easy to see)

Kubota BX2751 Front PTO Quick Hitch

• Mid-PTO Kit (driveshaft)
• Front PTO Subframe
• Male Quick Hitch

Kubota BX2763 60" heavy duty front blade

• Hydraulic angling
• Skid Shoe Kit

Kubota BX5450 50" front snowblower

• Kubota Quick Hitch / hydraulic lift / subframe kit
• Kubota Mid-PTO driveline forward extension kit
• Skid Shoe Kit

60" Mid-Mount Mower

• 30mm 1/2" drive shallow impact socket (blade removal)
• All American Blade Sharpener
• Stens MAG-1000 Blade Balancer
• Oregon Mower Deck Leveling Gauge ($10 and plastic)
• Grease zerk caps (orange, easy to see against black wheels, elsewhere)

Cyclone Rake XL

• Commercial 8HP engine, key start
• 3-point hitch adapter
• Dual Wheel Kit
• Front wheel kit
• Roof Rack Carrier
• Wall hanging kit

LandPride WB10 Weight Bucket

• Summer: Left empty and filled with wood on the way back from cutting wood, balancing the FEL both directions
• Winter: 120# sand, 200# salt (both bagged, used when needed)
• Tool platform (in the works--rethinking this one, maybe a 3-point hitch tool cage instead with some tools mounted on the FEL)

3 Point Hitch Modifications

• Messick's Telescopic Stabilizer Kit (USA made)
• Pat's Easy Change Quick Hitch (USA made)
• LandPride 3-Point 2-Function remote kit (be sure to get the correct kit from the dealer for your BX serial number)
• Summit Hydraulics Top & Tilt cylinders (still incoming-backordered for 9 months so far...)

WoodMaxx MX-8600 USA made 6" chipper

• 3 blade sets
• 3 shear bolt sets
• Hydraulic Oil: Rotella T4 15W40 Diesel
• WoodMaxx BD-10-0 10 micron hydraulic fluid filter
• ZINGA BE100P 10 micon hydraulic fluid filter
• 4-point soft foot kit
• Automatic feed decrease on overload

WoodMaxx FM-54 USA made Hammer Flail

• Slip-Clutch PTO Shaft
• 3 hammer sets
• Hydraulic Oil: Mobil Delvac Full Synthetic 75W-90

Camera system (currently working on install)

• Backup camera, implement camera
• Full-screen/split-screen/picture-in-picture
• Multi-channel video recording

Tools

• Two-hand professional 10,000 PSI manual grease gun
  Lucas NLGI #2 mining grease (with 5% molybdenum disulfide) for high-load slow-moving joints, overkill for a sub-compact tractor.
  Lucas NLGI #2 Red “N” Tacky lithium complex grease for bearings, U-joints, and fast moving parts.
  See:
  Lubrication Education
  Lucas Oil Greases
  The Grease Document
• LockNLube rebuildable 10K PSI Grease Gun Coupler
• TEKTON 1/2 Inch Drive Torque Wrench (changing wheels)
• TEKTON 3/8 Inch Drive Micrometer Torque Wrench (installing hydraulics)
• MIXPOWER 14 piece 1/2-Inch Drive Shallow Impact Socket Set, 11-32mm
• 16mm 1/2-Inch Drive Shallow Impact Socket
• 6" adjustable wrench
• BXpanded Hydraulic Pressure Tester (with shim kit)
• Titan 17716 hydraulic O-ring pick set (not yet ordered, rethinking this one...)
• Hydraulic floor jack (frequent wheel swaps)